|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
04-25-2006, 05:52 PM
|
||||
|
||||
|
Dyno footage Sunday night
Sunday is DynoDay.
I am going to get the car on the dyno. Not dyno tuned yet. Depending on the A/F...I may not get the motor spinning over 5500 RPM's. I won't know how high I am going to spin it until that when I am on the dyno. Anyone want to make some guesses? Chassis dyno. DynoJet dyno. Remember...car hasn't been fully tuned yet. This dyno corrects for altitude. So guess if I was at sea level. Footage will be Sunday afternoon sometime. 
__________________
1999 Pontiac Trans Am WS.6 #1747 Stock'ish' 
|
|
#2
04-25-2006, 06:02 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
aww i thought you already got the footage, i was all hiped up. well hope it all goes well and you put down some badass numbers
__________________
 87 firebird formula ws6 (currently has a old 78 305 with the following upgrades, including lots of miles and stock heads and internals....oops) crane cam cam specs performance valve springs and retainers, flowtech headers, 255 lph fuel pump, holley 600cfm carb, weiand single plane manifold, a healty diet. 14.90 1/4 mile....just wait for the 406 to be finished MY VIDEOS MY PICTURES -Tom
|
|
#3
04-25-2006, 06:55 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
good to hear that.. l say you will put down on sunday 470rwhp! after a good tune and push hard till 6k RPM you will put down 510rwhp
 l guess your car would stil make power at 6k RPM even 6.5k RPM.dont trust me, l am just making up those numbers 
|
|
#4
04-25-2006, 07:04 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
Actually...once tuned, it should continue gaining HP until about 6600 RPM's.
Torque will have faded off some by then...but the HP will pull it up there. I am really wondering what it will put down. Either way...footage coming. 
__________________
1999 Pontiac Trans Am WS.6 #1747 Stock'ish'
|
|
#8
04-25-2006, 08:26 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
What CI again? 402 or 408? injector size and pulse?
__________________
DarkblueTA GT70, FMIC, Alky-water injection, Hooker Cat back, 208/230 .549/.579 121LSA Cam, forged diamond pistons/eagle rods, LS6 block, Lakewood LCAs, BMR STB/PHRB/Sway Bars, poly torque arm bushing, Spec Stage 4i clutch, B&M Ripper Shifter, SLP Subframes, 60# injectors, KYB AGX shocks/struts, Moser 12 bolt(373 gears, 33 spline axles, posi, ta girdle/etc/etc/etc) and HPTuner kit 2007 Nissan Titan Daily Driver. 2* advance 
|
|
#9
04-25-2006, 08:35 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
402ci
42# injectors I would have to check the program quick to see the pulse. That is what you are refering to right?
__________________
1999 Pontiac Trans Am WS.6 #1747 Stock'ish'
|
|
#11
04-25-2006, 09:17 PM
|
||||
|
||||
|
Re: Dyno footage Sunday night
Man...you are WAY high.
Unless for some reason this motor is a HUGE freak. MAYBE I could get that kinda number once I am tuned. But even then I doubt it.
__________________
1999 Pontiac Trans Am WS.6 #1747 Stock'ish'
|
|
#12
04-25-2006, 09:29 PM
|
|||
|
|||
|
Re: Dyno footage Sunday night
Kind of ironic you said that, I just came back to change my numbers. I'll say 500hp at the crank and 445hp at the wheels. That's assuming your car is a stick.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
