My Prisma Markers ;))))))

[<<Si-Vtec>>]

i got my prismacolor markers today!!!!!!!!!!!!!!!!
i have the cool grays 12 set and the warm grays 12 set.
i have couple quastions:
1.why the fine tip of the marker bleed too much???
2.do i need to use pastels/color pencils/chalks when i color the car in gray/black/white????
3.if i do need them do i color with the pastels/color pencils/chalks first and then on top of one of them i color with the markers???
4.i'v seen some tutorials for markers and pastels but they were all with color not grays, dose someone has a tutorial about how to color with the grays markers????

thx for the help

si

[knightvision]

1. You can get special marker paper. It prevents the tip from bleeding and it also saves ink.
2. Usually, you do not only use the markers for the whole render. Use your markers for the darker parts of your car, for tires and air intakes. The ligher parts, where the sun is shining on, are drawn with pastells or color pencils.
3. The marker part is usually done first.

[<<Si-Vtec>>]

thx for the help i'll try that!

[Zwaag]

for me, I've been doing them in all marker, on a black car try doing black for the drakest part, then use a little 80% followed by 50% on the brightest parts

[<<Si-Vtec>>]

ya but the 80% and the 50% cool grays look too blue and the warm look too brown// :/

[Zwaag]

some blacks kinda do show blue in the paint, I mean sort of, not really, anyhoo, its up t you

[<<Si-Vtec>>]

well , i will color silver cars only with markers and when i'll get my phnton color markers i will maybe use pastels too.