 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-19-2006, 12:23 PM
|
#1 | |
|
AF Newbie
 Join Date: Mar 2006
Location: port hope
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
how to back probe cam sensor to ensure it is working?
no spark on my 93 lumina apv, tried everything i can think of new crank sensor, about 4 used ecm modules and tested all the wires for spark circuit , so i was wandering how to back probe cam sensor to make sure it is sending signal to the ecm any ideals?
|
|
|
|
|
04-19-2006, 12:41 PM
|
#2 | |
|
stupidity should hurt
 
Join Date: Aug 2004
Location: Flint, Michigan
Posts: 10,129
Thanks: 2
Thanked 22 Times in 22 Posts
|
Re: how to back probe cam sensor to ensure it is working?
I assume you have teh 3800 engine, as the 3100 has a distributor. IF you unhook the electrical plug, and hook an ohm meter to the two terminals on the cam sensor, as you crank the engine, your reading should fluctuate as the magnet passes the sensor.
__________________
 Still waiting for the "good old days" I'll get to bore my future grandchildren with! |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
