sub question-again

[kenwood guy]

im not yet done with my box but I have done some math and have figured im going to have between .84 and .72 cubic feet of space and about 5.6 in of mounting depth (maybe a little more) I was looking at the fosgate website and found something I know Im going to like...http://www.rockfordfosgate.com/produ...1&locale=en_US



and I have this amp.... now http://cgi.ebay.com/ebaymotors/KENWO...spagenameZWDVW



now the subs are 2ohm each (If I get them im getting 2) can I use them with this amp with no problem???? any information would be greatly appreciated thanx

[sportin83]

Originally Posted by kenwood guy

im not yet done with my box but I have done some math and have figured im going to have between .84 and .72 cubic feet of space and about 5.6 in of mounting depth (maybe a little more) I was looking at the fosgate website and found something I know Im going to like...http://www.rockfordfosgate.com/produ...1&locale=en_US



and I have this amp.... now http://cgi.ebay.com/ebaymotors/KENWO...spagenameZWDVW



now the subs are 2ohm each (If I get them im getting 2) can I use them with this amp with no problem???? any information would be greatly appreciated thanx

as long as that is a 2 channel amp and the subs are dvc's you should be fine. u can run them 2 different ways. can run series parrallel which is 4 ohms bridged on amp. or run each sub parallel and run in stereo mode on amp 2 ohms each channel.

[kenwood guy]

thanx

[kenwood guy]

you know I find it strange that stage 3's have a lower mounting depth then stage 2's why is that???

[sportin83]

the magnet may be bigger round instead of deaper. there is some kind of magnet they are using which is so much smaller but just as strong as a regular one. there is a company that makes a 15 with a tiny magnet but it is incredibly powerful and loud.

[v10_viper]

Those P3's look like awesome little subs, too bad a friend of mine talked me into the RE SE's...mated up to a SX1250.1

I've always been, and prolly always will be a fan of kicker's Punch series subs. I've had my Punch Z's for over 2 years, they were a year old when I bought them. They are in a .5 cubic foot box(each) under my seat and I've pushed just over 400 watts rms to them the whole time...

[kenwood guy]

kicker punch????? once im done with the boxes I plan on getting those I have always like the fosgate brand and hope to get em soon

[v10_viper]

Originally Posted by kenwood guy

kicker punch?????

Haha, yeah sorry, I get that SX1250 stuck in my head sometimes, my bad. The part that I hate about Rockford's is that I think the P1's and P2's look cooler than the P3's, my opinion I guess. I don't know what anyone else's take is on Punch series. Since you did mention Kicker though, they seem to have some pretty good subs out now too, although I think that prices are starting to seem ridiculous for them. Isn't the 12" P3 retailed at like, 300 bucks or something, make it 225ish and I think it'd be better.

[kenwood guy]

Originally Posted by v10_viper

Haha, yeah sorry, I get that SX1250 stuck in my head sometimes, my bad. The part that I hate about Rockford's is that I think the P1's and P2's look cooler than the P3's, my opinion I guess. I don't know what anyone else's take is on Punch series. Since you did mention Kicker though, they seem to have some pretty good subs out now too, although I think that prices are starting to seem ridiculous for them. Isn't the 12" P3 retailed at like, 300 bucks or something, make it 225ish and I think it'd be better.

yea there high up there but not as much as the audiobahn or jl subs those are some "serious cash required" subs i think if i look hard i can get some p3's for under 220