Got The Car Dyno Tuned Today

[gstclips]

Got my car dynoed at LSE today..here is the graph. I got an extra 15whp out of the tune. This is on 16.5-17 lbs of boost and pump gas. I was hoping for better but o well.




The go list:

K&N filter W/adapter plate
VRS 3” turbo back exhaust w/ ported O2 housing
Autometer triple gauge pillar pod w/ EGT, AF & boost gauges
FIC 650cc Fuel injectors
Walbro 190lph fuel pump
Apexi S-AFC II
GReddy type S BOV
SBR big FMIC
GReddy Profec B boost controller
Accel 8.5mm Wires
NGK BPR7ES spark plugs
Evo III 16G turbo with 34mm flapper
Ported exhaust manifold
ACT 2100lb clutch
1G throttle body
1G intake manifold
Manual 1G turbo Cams
Bore Cylinders .5 mm
2G pistons
1G reconditioned rods
New 2G rings
Valve job
ARP head studs


what do you think?

[blk_srt]

How much did that set you back? We seem to have about the same mods, so I hope I can make those numbers but I plan on running 20psi. Looks good though

[Thor06]

Hmmmmm... with that list, I would have expected it to be more like 310-330. Wierd.

[95_GSX]

Well it is WHP and he is only running a 16g on pump gas. I'm sure if he through some race gas in and cranked it up around 25 PSI he could get over 300 pretty easy. but those look like good numbers for the set up you have.

[blk_srt]

After putting it together that you are fwd those numbers do seem a little low. Was it a consirvative tune?

[defiancy]

I agree I think those numbers seem a bit low.

[gstclips]

yeah it was a pretty consevative tune, it is a street car and I want it to be reliable. He said the dyno is about 13% less than most dynos (dyno dynamics) so on other dynos it could be around 280-290. But its cars u race not horse power as he put it.

It was 180 for an hour of tuning and with my 660's it almost ran the afc to the max.

I am not going to put anymore money into this car...I promised myself I would stop after this tune. Well see what happens...bigger turbo and dsm link WOULD be the next step, and should easily put me in the 300 range.

pr ricer, u gonna get ur car dynoed on the 30th at LSE?

[defiancy]

180? whoa, Is that good for there? Because that is shitty for here.

[scottsee]

You have a 1g tb/intake setup on a 2g head w/1g turbo cams? Did you have the 2g head machined to match the 1g intake runners? Did they use a wideband to get your Safc-2 matched to your 660's?

[blk_srt]

he has a 6 bolt so I would guess he has a 1g head to, maybe not though

[crunchymilk55]

numbers seem a bit low, but that's ok

this turbo doesn't make 300+ unless ALL the supporting mods are there and really high boost.

[gstclips]

Originally Posted by crunchymilk55

numbers seem a bit low, but that's ok

this turbo doesn't make 300+ unless ALL the supporting mods are there and really high boost.

I have all the supporting mods I would need for 300-350hp for sure...like I said it was on 16.5 lbs of boost (only thing I really need is more boost and maybe a bigger turbo).

yeah its a 1g motor.... everything matches up, im not retarted
haha

[Talon69]

yes and no on the bigger turbo for HP, i have seen alot of cars running 400HP on the evo3 big 16g, so you do have the potential , Im hoping for around 350HP when my car is completed in the next month i hope.

[gstclips]

are you talkin whp? i dunno about 350-400whp on a 16g....

[Talon69]

I posted this on DSMLINK forum and 1 guy sayed he has heard of a guy running 430WHP on the 16G so it possible man