|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-29-2006, 10:50 PM
|
|||
|
|||
|
Reverse light problems
A few days ago my reverse lights stopped working on my 97 s-10. So i checked the bulbs and they are good, as with the fuse. Put a voltmeter to where the bulbs connect, got nothing. the grounds are good. from what i could tell the wires were intacked. ALL other lights work just fine.
Im thinking its the switch or sensor that "turns on" the lights. but i dont know where it is located or what it looks like... If someone could inform me of this, or has any other suggestions, it would be much apreciated.. thanks btw its a manual trasnmision... |
|
#2
03-30-2006, 12:19 AM
|
|||
|
|||
|
Re: Reverse light problems
there is a sensor on the side of the tranny. it screws in and the tip of them wear out. its easy to replace take you a couple of mins. should be on the driver side in line with the shifter.
|
|
#3
03-30-2006, 03:19 AM
|
||||
|
||||
|
Re: Reverse light problems
auto or manual transmission?
|
|
#4
03-30-2006, 03:52 AM
|
||||
|
||||
|
Re: Reverse light problems
I just bought my truck a couple months ago. Just the other day I noticed my reverse lights are not working either. '98 S10 2.2 Manual trans. I'm gonna check for that sensor, And i'll be watching this thread!
Thanks! |
|
#6
03-30-2006, 12:09 PM
|
|||
|
|||
|
Re: Reverse light problems
I located a changed out the sensor and now i have reverse lights! thanks!
It was actually located on the passenger side. There was two of em and it was the one closer to the front of the truck. the other on was inline with the shifter but when i looked at the new one that i got the part where the wires plugged in was different. So...obviously it was the other one... but thanks for your input
__________________
Not liable for spelling errors... |
|
#8
08-11-2007, 01:02 PM
|
|||
|
|||
|
Re: Reverse light problems
Quote:
Half the autoparts stores here, including napa want to sell me a netural safety switch.. they think it's dual function.. I'm so confused..
__________________
1996 Chevy S-10 STD bed, STD Cab / 2.2 4cyl Stock 5 spd. 123k "Ultra-Lux" Manual window / door lock actuators. Sony CDX-M9900 Head / Sony XM-2150GSX Kicker 03CVR10 10"x2 Boxes, built by hand / Dash speakers.. well.. "Chevy craft" paper kickers. The master cylinder *was* dying. It wasn't normal. So pffft. :-)~ As always, thanks for the advice though. |
|
#9
08-15-2007, 11:04 AM
|
||||
|
||||
|
Re: Reverse light problems
this thread is over a year old. please refrain from posting in old threads
__________________
2000 Chevy Blazer ZR2 Performance Mods: Numerous Suspension Mods: Some, but not enough Exterior Mods: Just Right 1987 Buick Turbo T Dark Red Low 11 sec sleeper  .030 4.1 block, PT6262E, & other odds and ends.... My Cardomain |
|
|
POST REPLY TO THIS THREAD |
 |
|
|
