|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-28-2006, 10:28 AM
|
|||
|
|||
|
Anothe 95 Jimmy problem
As I mentioned in an earlier thread, I had the EGR valve changed less than a week a ago. The truck has been running fine the last few days (driven about 40 miles). My kid is driving yesterday doing about 45mph and the engine goes up to 2000 rpms and stays there. Stops the truck and lets it rest. Starts again and now it's idling at about 800 rpms and is shaking and wants to stall. Gets the truck home and has a hard time breaking. The breaks were checked out two weeks ago and the system bled. No SES light.
I tried starting it this morning. Engine will start but idle is rough and wants to stall at first until I give it some gas. It's idling at about 600-800 rpms. Tried this a few times and the same thing. Any suggestions as to what's going on now? Could a vacumn leak be the cause because of the breaking problem. Still no SES light on. Thanks. 
|
|
#2
03-29-2006, 10:05 PM
|
|||
|
|||
|
Re: Anothe 95 Jimmy problem
mine also does something like that, it feels like the brake booster isn;t working and it hissed when I touch the break pedal... vaccume leak???
__________________
Black 99 Jetta GLX VR6 Black 92 BMW 525I Blue 95 GMC Jimmy SLT 4.3L VORTEC V6 (Sold... Junk) Green 98 Jeep Cherokee SE (totaled Electrical fire) Red 95 Jeep Cherokee Sport (Gone) Green 93 Jeep Grand Cherokee Limited (for sale) [email protected] "Racing a ricer is just like competing in the special olympics, even if you win your still retarded"
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
