Awesome deal. 4G637 1G to 2G Swap Question

[NitrousFreak27]

Hey. I got a awesome deal on a 95 GTS 5spd but the engine was blown and killed the turbo with it. He has a complete 1G 4g63T engine so all Id have to do is do the swap. Where would I find a good deal on the brackets/parts for the swap? Also, he mentioned that only prob with the 1G engine was that he recommends boring out the cylinders to .020 because the pistons werent good. I might as well bore it out now then later but I was wondering what is the average price for the job without the pistons? I could get some .020 pistons for about $150 and can install them myself just need the cylinders bored. Thanks.

[Killa]

over here cost 3k to swap 1g turbo to 2g car, that include the engine.

[clipsekid99]

First of all, its a 95 gst, not gts. Doing the 6 bolt swap (1g 4g63t into a 2g) is a very common swap. It will drop right into place without new brackets or parts. Do a search on this subject and you will find many, many posts about it.

EDIT: What year is the car the 1g motor is comming out of? It might not be a 6 bolt, but it will still fit perfectly.

[NitrousFreak27]

Ya sorry about that I meant GST, just woke up and posted it . Well anyways, the engine is a 90 4G63T 6 bolt engine but I heard that it needed brackets or some minor work to get it to install? Also, Im doing the swap I wanted to know how much it would cost to bore the engine.

[clipsekid99]

Nope, should just drop right into place. Do the search and you will find many articles on this topic

[ez1286]

http://www.magnusmotorsports.com/article_1g2g.htm
That should help. To get the cylinders bored shouldn't be too much, my brother had his block bored, honed, hot-tanked and new freeze plugs, I think it was around $225. And that was at a place that builds race engines so you might be able to find it cheaper.

[defiancy]

Here for a block hone and bore etc. It's $175