|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Non-Performance This is the place for all interior, exterior, and general non-performance modifcations. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
i have a 03 mustang v6 with the mach1 sound system. after hooking up my new head unit, the two connectors for speaker's amp wernt hooked in, thus i wasnt running the amps. the question is how do i do it. is there something i need to buy or what. thanx.
|
|
#2
|
||||
|
||||
|
Re: how do i hook up my stock amps to my aftermarket reciever
disclaimer - "i don't know the mach system at all, so this might be incorrect"
your aftermarket deck probably puts out more power than the stock unit with amps.
__________________
free hypsi87!! Dan's White Horse Bring back Melt Crew 002 - 3657 posts can't be wrong! |
|
#3
|
|||
|
|||
|
Re: how do i hook up my stock amps to my aftermarket reciever
well the bass response with the stock head unit is better probably because of the 2 amps hooked into it. now im just wondering what kind of wiring needs to be taken place for me to get these amps running. thanx.
|
|
#4
|
|||
|
|||
|
Re: how do i hook up my stock amps to my aftermarket reciever
you have to bypass the amp and only 4 of the 8 speakers will work.
__________________
2004 F350 6.0 4x4 auto SRW SCT X3 with innovative tunes, autometer boost/trans/pyro, AFE stage 2, MBRP 4" no muffler or cat, EGR delete, ARP studs, 8' fisher MM2, misc appearance 90 F350 7.3 IDI 4x4 SRW (sold) bolt on 02 mustang 232 4R70W vert (sold) built 88 toyota pickup (sold) bolt on 92 camaro LO3 TBI (sold) |
|
#5
|
||||
|
||||
|
Re: how do i hook up my stock amps to my aftermarket reciever
you need a scoshe wiring harness to integrate the mach system, i can take a pic of it and put up the model # when i get home.
__________________
07 jeep cherokee srt8 99 saleen s281 05 cbr 1000rr |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|