Fujimi Integra Type R will be next on the list to build.

[primera man]

Here's the next project that arrived today from HLJ

As you can see from the rims they dont look the best with the tyres. I may change to the VOLK ones that i got sent or just change the tyres to a lower profile and use the original rims....but i kinda like the 18" rims better as they will fill the guards up better and may get a lowering job with it!!! What do you guys think?

At this stage i kinda like the car in white with white rims.

[daggerlee]

Definitely go with the Volks...but first you must finish up your Porsche!! I'm dying to see it finished!! :sun:

[Jay!]

Type Rs do look good in white!

[Echelon]

Does that model have good blueprint veiws? I have been tring to locate a model to buy here but have had no success. I would like to make a 3D model of the car. Anyway, hope it turns out as well as the other cars I have seen from you

[S Brake]

I would use the 18's just make the tires more low profile, then it would look great.

[Vric]

ah lucky guy !!!

For the rims i would go with the stock one on the model

[MX100]

whoa nice~ i bet it will lok so good after u finish it cuz all the model u done r all so good~ can't wait to c it~
go with the TE-37 but paitn it black
thats wat i would do for sure~
whiet cars with black rims loooks so nice!

[Styxnpicks]

I agree with MX100, it would look very nice white with dark rims, but i wouldn't paint them black, i'd paint them gunmetal

[turbos86]

NO!!!! The dark side is calling on me once more!!!
MUST.......RESIST........NO!!!!!!!!!!

AWWW HONDA!!!! Integra with TE-37.....DROLLLLL......


NO! MUST.....NOT......GIVE....IN
AWWWW, don't show me another picture!@#!:finger:

[djmr2]

AHK! thanks alot Primera Man, just bought a MR2 SW20 with 18inch TE37's ALL THANKS TO YOU! and now i'm even more broke.

CANNOT RESIST HLJ!
ahk

[pkw1]

if you ask me, I say go with the stock rims, or if you want the TE-37s.. get the 17" ones... I really think the more proportional look is much more realistic then the over size wheels. (as you may see my taste in the models that i've built and shown so far)

[siege35]

Originally posted by turbos86
NO!!!! The dark side is calling on me once more!!!
MUST.......RESIST........NO!!!!!!!!!!

AWWW HONDA!!!! Integra with TE-37.....DROLLLLL......


NO! MUST.....NOT......GIVE....IN
AWWWW, don't show me another picture!@#!:finger:

Just take your (real) car for a drift session to bring yourself back to reality although I must say I like the look of a nice DC5...ran across some ideas here:

http://www.ings-net.com/parts_dc5.html

(while looking at S14 aero parts)

Of course I'd still do a strawberry face silvia or s15 with s13 frontend first without a doubt... *hint* *hint*

In terms of that DC5 you're working on Primera man I vote TE-37 in gunmetal with the white body...I've always liked them on the DC2 as well

[primera man]

Thanks for the time to reply guys.
Your starting to twist my leg for the TE-37's in gunmetal....and maybe just a little lowering job

djmr2...glad to help out :finger: :finger: ...j/k
turbos86.... ..lol
siege35.....nice link

[pkw1]

I was actually planning on making that DC5 body kit when I saw it in an OPTION magazine tonight, but then I figure, I don't need another 1/2 done nice body kit and primed model shell sitting on toliet paper rolls

so i scrapped the idea.... :smilie:

Originally posted by siege35


Just take your (real) car for a drift session to bring yourself back to reality although I must say I like the look of a nice DC5...ran across some ideas here:

http://www.ings-net.com/parts_dc5.html

(while looking at S14 aero parts)

Of course I'd still do a strawberry face silvia or s15 with s13 frontend first without a doubt... *hint* *hint*

In terms of that DC5 you're working on Primera man I vote TE-37 in gunmetal with the white body...I've always liked them on the DC2 as well