What is te biggest size rim that I can put on my 2000 Chevy s/ten Blazer?

[wb3032]

I am hoping at least 20"s.

[Anarki_Renegades]

Twenty's may be possible, but you'd have almost no tire. Is your truck lifted or lowered at all, because that would affect it.
:greenchai

[lifeiscars]

yes lifting and lowering it will effect it.

[C-Town216]

As long as we're talking about a 2WD I'd sugest an 18" / 20" wheel combo. Putting dubs on the front, even with a 205/25ZR20 tire which would keep you around 24" total wheel height and ride like a brick, will probally prevent full turn and rub. An 18"x 7" front rim in a 205/40ZR18 and a tubbed rear with a 20"x 12" in a fat 355/30ZR20 will still alow you to lay frame using dropped spindels, adjustable camber upper control arms, and bags in the front, with a 5 link or triangulated 4 link and bags in the rear. Plus it would have a "pro-street" look mean as Hell. You will have to give up the air conditioner and move up the inner fender wells, but you'll still have plenty of room for 350 headers. The battery will have to go to the back, and the window washer fluid bottle can be moved and the tubes lengthened. If you want to see some great pics of Blazers laying frame on 18/20's go to:
www.BlazinLow.com

[DeViL]

20x8.5 on the front will fit without any rubbing. 20x9 might do it. I'm looking into that as well with my S-10.

You can go as far as putting 22 inch wheels on the rear.

[webcrawler]

My 96 s10 Blazer is stock

"9.5 * 30" all around any bigger and it will start rubbing in turns