clutch replacement

[Diss_Mist]

can someone please e-mail me i am gettin an 87 civic that someone has already tooken apart to replace the clutch and now i have to put it all back together and install the clutch and i dont want to put the bolts in the wrong places so i was hopeing someone could tell me a good site or how its dont my e-mail address is [email protected] thanx for the help

[akalima]

go get urself a hanes manual for ur civic. That way when u have work to do u have a complete libray on how to do it . I have one for all my vehicles

[D[X]P]

ya hanes is good stuff

[drew123_85008]

make shure that the bolts that hold the fly wheel r the correct ones for standard or automatic if the flywheel is missing if not you put the cluthc on then the pressure plate next the cluthc will have like springs on it those go fasing out like twards you then the pressure plate goes on next that one goes on one way only keep trying different slots till the bolt pattern lines up then use the guide that comes in the new cluthc kit to keep the cluthc stait till u tighten the bolts after that ur done put the tranny back on this is for all civics 1st gen and second some third