89 Nissan 240sx hose question

[malchor]

Looking for a little help here. Just started doing my own work on my car and have a problem. The other day my car started to overheat. When I turned it off coolant started to spray out of the bottom. I got it home, blocked it up, and found that one of the bottom radiator hoses was almost completely disconnected. I tightened it up and I'm pretty sure that the leak is taken care of.

The problem is that when I was checkin out the top hoses I noticed that there were 2 small hoses that weren't connected to anything. I looked around a little and noticed that there were 2 places that it was possible that they could be hooked into. One of the hoses T-connected into the hose that goes from the top of my radiator to the overflow reservoir and the other connects into the top of the purge control valve. I took a picture of the place where the hoses would fit and attaching it to the post. I'm just not sure which hose goes on which connector.

http://img484.imageshack.us/img484/7749/thequestion1lx.jpg

In the picture you can see the 2 connectors on the left that the hoses could connect to.

Any help would be greatly appreciated. Thanks.

Nick

[AWDSR20]

is it toward the fire wall? take another pix dude, that one sucks... zoom out a bit man...

[nissan_240sx]

yeah zoom out alittle, dont know where that part is at lol

When I turned it off coolant started to spray out of the bottom. I got it home, blocked it up, and found that one of the bottom radiator hoses was almost completely disconnected. I tightened it up and I'm pretty sure that the leak is taken care of.

check your hoses, make sure they are stiff/hard and not mushy. pretty soon they might blow up. yes blow up lol

[therealrayman]

that part looks like the backet and hard hose off the bottom of the intake manifold.