|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
quick bose stereo question
hey everybody, just registered on here and had a quick question....i have an 03 silverado with the factory bose system in it. i have a spare amp/2 10's id like to put in and was just wondering if any one could tell me which wires comin of the factory amp under the center console are for the right and left speakers so i can splice my line converter in and run the rca's off of it....id like to try and keep the converter down there close to the amp instead of goin into the door panels/rear speakers.....any input would be apprecaited
Thanks, Brian |
|
#2
|
|||
|
|||
|
Re: quick bose stereo question
found the info i was lookin for through the AllData at my work. If anyone else needs it heres what i used
Left Rear + = yellow Left Rear - = Brown Right Rear + = Light Blue Right Rear - = Dark Blue Tapped in right at the connector by the amp. Not finished makin boxes yet so im not 100% sure that it works but accodring to the diagrams i got i dont see why it wont, hope this helps some one |
|
#3
|
||||
|
||||
|
Re: quick bose stereo question
Watch the resistance..... Not standard....
__________________
![]() "The Sleeper" '05 6.0L VHO Cam in and Low 14's happening at the track ![]() Check out my Ride |
|
#4
|
|||
|
|||
|
Re: quick bose stereo question
i dont see it lowering resistance in anything?....please expand on that
|
|
#5
|
||||
|
||||
|
Re: quick bose stereo question
Just be careful man. I installed 2 10's in a 04 duramax with Bose and it was hard as hell to get a clean signal. you have to splice in behind the head unit so you get a signal before it goes to the Bose amp.
__________________
1998 ECSB Z71
Whelen LED's Kenwood 2-way "BIG 3" 2500+ watt audio ![]() |
|
#6
|
|||
|
|||
|
Re: quick bose stereo question
yea i spliced in on the input side of the amp so i think it should be alright
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|