|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Passkey
Can anyone tell me the passkey is located in a 05 tahoe?
I'm installing an alarm and can't find it. Thanks, Delorian |
|
#2
|
|||
|
|||
|
Re: More detail
I'm installing a Crimestopper 2016FM and a Directed 457GW in a 2005 Tahoe.
For the 457, the 3 pin connector says to cut the pink ignition wire to the PK/Passkey and connect the pink/black and pink wires to it. I can't find a blackbox labled PK, Passkey anywhere under the dash. Can anyone let me know where this bugger is hidden or another connection location? Thanks for any help, |
|
#3
|
|||
|
|||
|
Re: More detail
Quote:
2005 Chevrolet Tahoe Category: Immobilizer Bypass Required: Yes Type: Passlock II Part#: 556LW Notes: Not required if using the combo interface module. The Passlock II wire colors are yellow, black, and red/white (not used). Alternates: 555LW, DesignTech 20402, DesignTech 29402 Category: Combo Interface Required: Yes Type: Data Bus Part#: 457GW http://www.directwholesale.net/diagr...6670&MakeID=54 You will not have a transponder box under the dash. You need to find the 3 Passlock wires as they exit the Ignition Lock Cylinder as described in the link above. Hope this helps. Ray Proud Member of The Anti-Passlock Club
|
|
#4
|
|||
|
|||
|
Re: Passkey
Thanks, I got it working last night. It turned out to be a bad connection on the inline fuse for the 457. I guess I didn't know I had to test their connections too!
Thanks, Delorian |
|
#5
|
|||
|
|||
|
Re: Passkey
Two more questions. When I disarm, the dome light comes on, but not the parking lights. My wife wants this option. I checked the programming and they should be on by default. I reprogrammed it to make sure, still no luck. They do flash during arming and disarming so I know they are connected. I was also dark enough so I know the photo cell didn't have anything to do with it.
Also, if it is already armed and I hit the lock again, the alarm sounds like I held a button for panic alarm. Is that normal for Tahoe? I install the exact same alarm in my 91 mustang (minus the 457) and all is working fine on it. Thanks, |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|