FS: KA24E KA24DE s13 s14 Turbo Kit

[mv520]

Here is a used turbo kit off of a 89 240sx SOHC (ka24E). If your looking for a kit that spools hard and fast then this is what you are looking at. This kit has a T3 oil cooled ball bearing turbo, external wastegate with 6 and 8lb springs, Aluminum 2.5" piping all cut to fit any s13 style 240sx (89-94) with hand welded removable BOV (rediculously loud!!!!) And all the couplers that you would need. And the massive 31" by 12" polished aluminum intercooler!!!!! It also includes a 8:1 Fuel Managment Unit (FMU). Turbo has the function 7 inlet/outlets, and has minimal shaft play if any at all. Comes with the downpipe and wastegate tube that i was using, but they need some welding finished because we ran out of argon.

I took out a loan for this turbo and now my turbo kit is sitting here collecting dust which it shouldn't. It should be powering a 240 that's killing some American cars. But anyways I still got to find a motor and get pistons, connecting rods (forged by the way), bearings etc, plus machine work. It’s going to be too much. So this kit would be good for a person who is looking for a SOHC turbo kit quick. Or has a motor built. Whatever it is I’m selling and am moving to a different project with my 240. Well here is the description of when I bought. It came with homemade SOHC manifold but then I sold it on eBay since I was moving on to DOHC of the ka24 series motor. You’re thinking how much I’m asking for? Well whatever the best offer I get. I was qouted 2K for this kit but ill go a lower. I'll throw in a rear differential gasket that I was going to replace for my 89 240 since it was leaking, for free. I have no clue how to take the rear differental off. This kit can also be used on sohc (ka24e) or dohc (ka24de) 240sx with a different manifold. Enjoy

PM Me
ILL
1800 OBO
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8032066401

[Pavlo]

Way too overpriced. I can piece out a much better one for way under that. First of all you have a crappy FMU, absolutely no details on parts, cheap ebay intercooler, cheap ebay blowoff valve (greddy type-S knock-off is better). Your downpipe (or whatever that horrid thing is) in the 1st picture is really bad, bad welds, crush bend. It looks like you bought a flux-core welder, some AdvancedAP piping and ghetto riged that.
Good luck getting $800 for all of that.

[nissan_240sx]

hm good luck with the sell