|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#2
01-17-2006, 04:39 PM
|
||||
|
||||
|
Re: PA 93 0-62mph time
You haven't found out by timing yourself so you're asking us?! What fun is that?! j/k
 My 92' standard model w/ Dynaride hit 60 in 9 seconds before I installed a superchip(that's from timing with a watch, so it couldn't be that accurate!), but a 93' has more torque so it may be a little quicker..
__________________
 http://www.cardomain.com/ride/2653398 1992 Buick Park Avenue (Daily driver)  2001 Saturn SL1 (gas saver) 
|
|
#3
01-19-2006, 10:50 AM
|
||||
|
||||
|
Re: PA 93 0-62mph time
__________________
Knowledge can be communicated, but not wisdom!   
|
|
#4
01-19-2006, 11:32 AM
|
|||
|
|||
|
Re: PA 93 0-62mph time
I wrote 62mph because it's almost 100km/h, here in Europe we use metric units and acceleration time is measured from 0 to 100 km/h. I've got PA w/o supercharger so 0-60 time for Ultra is not what I'm looking for.
|
|
#5
01-19-2006, 06:20 PM
|
||||
|
||||
|
Re: PA 93 0-62mph time
Listed below are two test for a 91 & 94. The 91, is obviously not supercharged. (Very few 91's were supercharged)! Take a .01 away from the 91 times due to the additional torque of the 93, and you should be close. Add .01 for the 2mph & you will be right on it!
1991 Buick Park Avenue Ultra 9.6 17.1 1994 Buick Park Avenue Ultra 7.3 15.5
__________________
Knowledge can be communicated, but not wisdom!
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
