|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-08-2006, 11:11 AM
|
|||
|
|||
2000 Hydraulic clutch slave cylinder line removal
Hi guys, first time user of this site here, looking for help. I'm changing the clutch in my 2000 ZR2 and the hydraulic clutch slave cylinder has to be removed before pulling the flywheel housing. The Haynes manual(very vague) says a special tool or two screwdrivers are needed to unclip the quick disconnect. I can't see or feel any clips. We started to unmate the flywheel hsg and trans to get another view, but it has us stopped, too. Anybody changed a clutch and have any advice to share about the whole repair?
|
|
#2
01-08-2006, 12:20 PM
|
|||
|
|||
|
Re: 2000 Hydraulic clutch slave cylinder line removal
Hey guys! FYI Back in 02-09-2005 Logikal had the same problem, how to fix, including photos! I love this site!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
