|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
i own a 79 camaro with a 350 small block, i have already put headers on it and put a 400 trans in the place of the stock 350 one i have all aluminum up top and a new edelbrock carb but i would like to get a little more power. anyone know any ideas?
|
|
#2
|
||||
|
||||
|
Re: more power
|
|
#3
|
|||
|
|||
|
Re: more power
Depends on how much you're willing to spend but forced induction, cam, and heads would be a good start. You could also go with nitrous...
|
|
#4
|
|||
|
|||
|
Re: more power
First thing get a good set of heads,cam and i would get rid of the edeljunk carb,and get a demon or holley.oh i forgot don't over cam or carb the motor make sure that all the parts work well together.
__________________
This is what 500 plus hp looks like.CNC ported AFRHEADS WITH 2.02 INT 1.60EXH,210 intake runners 74cc chambers, 750 speed demon carb,weiand intake,comp cams 292 with .501/.501 lift ,4340 forged crank,eagle H-beam rods duroshield bearings,KB forged 10 1/2:1 pistons,headers with 1 3/4 primaries ,MSD 6AL,comp cams pro mag1.6 rockers,holley blue pro-series pumps,MSD billet distributor.All stuffed into a 355.[img ] |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|