-
Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Chevrolet > S-10
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 12-30-2005, 12:56 PM
trippah60 trippah60 is offline
AF Newbie
 
Join Date: Dec 2005
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
service engine light on

I have a 95 s10 with a vortek engine. I tried the jumper method to get the code and here is what came out not sure how many codes this is. Each set flashed 3 times, (1 flash then 2) (1 flash then 5) (3 flashes then 2) (4 flashes then 3) any help with this would be greatly appreciated.
Reply With Quote
  #2  
Old 12-30-2005, 02:06 PM
RahX RahX is offline
AF Enthusiast
 
Join Date: Oct 2005
Posts: 1,258
Thanks: 0
Thanked 1 Time in 1 Post
Re: service engine light on

15-low temp indicated
32-egr
43-knock sensor
code 12 will always be displayed, its like a communication test code or soemthing. its irrelevant. have you done anything to the truck recently?
Reply With Quote
  #3  
Old 12-30-2005, 05:06 PM
trippah60 trippah60 is offline
AF Newbie
Thread starter
 
Join Date: Dec 2005
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: service engine light on

Quote:
Originally Posted by RahX
15-low temp indicated
32-egr
43-knock sensor
code 12 will always be displayed, its like a communication test code or soemthing. its irrelevant. have you done anything to the truck recently?
Ok a lil update, vehicle also had a hard starting problem after running and being shut off for a while, cranks like 20 secs before it starts and blows a puff of smoke out the tail pipe. Today i replaced both temp sensors,temp gauge wasnt working either, guage works now but still have same starting problem. I reset the computer and now im just getting the 43-knock sensor code
Reply With Quote
  #4  
Old 12-30-2005, 09:10 PM
rlith's Avatar
rlith rlith is offline
AF Enthusiast
 
Join Date: Jun 2003
Posts: 3,549
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via AIM to rlith Send a message via MSN to rlith
Re: Re: Re: service engine light on

Quote:
Originally Posted by trippah60
Ok a lil update, vehicle also had a hard starting problem after running and being shut off for a while, cranks like 20 secs before it starts and blows a puff of smoke out the tail pipe. Today i replaced both temp sensors,temp gauge wasnt working either, guage works now but still have same starting problem. I reset the computer and now im just getting the 43-knock sensor code
The hard start may be do to a leaking CPI and/or nut kit.,..Pull your upper plenum and check for washing. Also run a pressure test on your fuel system. Clamp off the return line. If it doesn't hold pressure your fuel pump could be dying out. Your pressure should be at 56-60 to start.

For the knock sensor you need to replace it.

You have 2, 1 on the driver's side of the block. Between and below the 3 and 5 plugs. And you will have another 1 on the back of the passenger side head against the firewall.
__________________


95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Chevrolet > S-10


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:07 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts