|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-25-2005, 12:32 PM
|
||||
|
||||
|
about to buy an fc
im about to buy a turbo II, and i just wanted to know, what all should i replace on the car when i get it (a good website link is also helpful for this) i have only been able to find specs., and how much should all the parts cost?
i really want to make this a reliable car. also whats the best repair manual for the turbo II? thanks very much for the help
__________________
|
|
#2
12-25-2005, 03:18 PM
|
|||
|
|||
|
Re: about to buy an fc
Ummm replace wear and tare parts.
Vacume lines hoses flush rad replace belts replace plugs plug wires every bushing in the car change oil and filter change diff fluid change and bleed clutch fluid change and clean brake fluid replace cold start fluid new thermo wax pellet new TPS tires aftermarket water temp guage shifter bushings air filter bulbs wiper blades rad caps ECT ECT The list is endless bud. The car is old, replace EVERYTHING you can afford to do. Then and only then modifie the car.
__________________
 Dont drive faster than your angels can fly
|
|
#4
12-26-2005, 08:40 PM
|
||||
|
||||
|
Re: about to buy an fc
buy my car
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines
|
|
#5
12-26-2005, 11:28 PM
|
|||
|
|||
|
Full factory manual at www.ilovemyrx7.com
Sites a little slow, but it's pdf and everything you need. Ok just used the link and the site appears to be down or has closed, but it used to have all the factory manuals.
|
|
#6
12-27-2005, 09:07 AM
|
||||
|
||||
|
Re: about to buy an fc
Quote:
http://208.62.166.66:82/guest/shop_manuals/ check the faq
__________________
RX-7 TII
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
