|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-09-2005, 06:02 PM
|
|||
|
|||
|
3.1 cylinder 6 fireing problem
ok, ive narrowed the problems of my 3.1 down to cylinder 6 the spark is ok, the gap is ok, the resitance on my injector is ok, is any way to see if my wires are messed up??
|
|
#2
12-09-2005, 07:57 PM
|
|||
|
|||
|
I assume the coil is OK for that cylinder? If that is the case you could measure resisitance on your suspect wire vs one of the other wires. Is is a dead cylinder, slight miss, bad miss? Our 91 has burned it's share of plug wires in it's lifetime, and it has also lost a coil or two. Each coil pack controls 2 cylinders, possible to be good on one, bad on another.
__________________
I used to be indecisive, now I am not so sure.
|
|
#3
12-10-2005, 04:52 PM
|
|||
|
|||
|
Re: 3.1 cylinder 6 fireing problem
ok, we did some checking and the injector was faulty, so we are gonna replace it and hope that fixes it
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
