|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-19-2005, 11:15 AM
|
|||
|
|||
oil in the cooling system
need help (88 mx-6 turbo, standard)... recently changed the head gasket, water pump and thermostat. also drained the coolant numerous times, but the oil is still mixing with the coolant but no evidence of water in the engine...
|
|
#3
11-23-2005, 10:29 AM
|
||||
|
||||
|
Re: oil in the cooling system
try back flushing the cooling system the heater cor and all that
__________________
Just because its a honda dosent make it fast ------------------------------------------- 96 gt-ze 2 1/4" magnaflo headers back,short ram intake ,msd,short throw shifter,eibach springs,fidenza fw,clutch masters stage 2,t3/t4 turbo install soon,poly engine mounts ------------------------------------------ www.probesnw.com www.probetalk.com www.mx6.com
|
|
#4
11-29-2005, 03:04 AM
|
||||
|
||||
|
Re: oil in the cooling system
Take it in and have the cooling system flushed with a cleaner and see if you get oil later down the road still mixing.
Also, just to make sure you have no leaks in Head/Intake Manifold gaskets, Pull off your oil filler cap and look inside it for white goo, if none you should be fine in that department.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
