|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
||||
|
||||
|
My 92 GT's left turn signal died and the bulb in the front went too. I replaced the bulb and it went again. Odd. I KNOW the turn signal has an issue because I heard a little tick while driving one day and there was a little smoke trail coming from the 4-way switch on the top of the column. Ever since then I have had to push the left turn repeatedly to get that side of the car to blink.
So today I removed the steering wheel and had to stop at the metal plate that the steering pin locks into when you shut off the car. I cannot see how to remove that. If I turn it the wheels turn too. I used the Haynes manual to get to that point but its a complete loss because they do not show my model. Theirs is square in the column and mine is round. Nothing is similar. I do not think its a fuse, but the repeated burn out could mean that or a wire... But still stuck at the column. Where do I go from here? I have to put it all back together to get to work tomorrow.. Please Help |
|
#2
|
|||
|
|||
|
Go to Beretta.net or Berettastuff.com I've been on both sites and they are usually great help. We never pulled our 91' off because of the air bag.
|
|
#3
|
||||
|
||||
|
Re: 1992 Left Turn Signal Dead - Cannot locate in Column!
Beretta.net had nothing and their search feature turned no results. I got frustrated and left. Have not been to any other beretta boards but I guess i should. Thanks for the reminder.
|
|
#4
|
|||
|
|||
|
Yeah Beretta.net you have to sit and figure out the site I really enjoy Berettastuff.com if you don't find it there email the guy. He is pretty reliable I emailed him about something and he pointed me in the right direction. Hopefully you get if figured out.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|