|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-10-2005, 11:36 PM
|
||||
|
||||
|
1994 Blazer Dash Lights
Is there any step by step procedures with diagrams in how to replace the dash board lights on a 1994 Blazer 4 door, 2 wheel drive. Iv'e checked this form and couldn't find anything except what bulb size and number it is.
__________________
1994 1st.Gen. S10 Blazer Tahoe Aloha Gabe My Fleet     
|
|
#2
10-11-2005, 09:56 AM
|
|||
|
|||
|
Re: 1994 Blazer Dash Lights
I have replaced the bulbs b4 it wasn't hard at all. But the bulbs cost me $35. I got them at NAPA. You have to remove the plastic around the gauge cluster, the heat and A/C controls, and light switch controls. Then there are 4 bolts holding the gauge cluster in. One in each corner. And that should be it. Someone correct me if I am wrong.
|
|
#3
10-11-2005, 10:13 AM
|
||||
|
||||
|
Re: 1994 Blazer Dash Lights
The most usefull site was just posted, giving step by step instructions of how to remove the gauge cluster.
http://mtx.mine.nu/s10/ once that is done, follow rilth's instruction on this post. http://www.automotiveforums.com/vbul...d.php?t=379971
__________________
94 Blazer S-10 1st Gen-4wd 4.3L W V6 Faster and louder than stock, but nonetheless a blazer!
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
