|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-09-2005, 10:06 AM
|
|||
|
|||
|
Radio harness plug needed
Anyone know where I can find a male harness plug for a '99 Rodeo factory radio? If I could post a picture, I would, or if someone can host it for me, I'll send it to you.
Thanks.
__________________
"I'll feed their greed with my need for speed" 
|
|
#2
10-09-2005, 03:56 PM
|
||||
|
||||
|
You could try one of THESE (the T harness) then just cut the wired and use whatever part you need. Keep the female end, then if you ever want to put in after market radio you already have the part.
The male end is from the wiring harness in the vehicle right? Did someone cut yours off? The only other way I know of is to get one out of a salvage yard.
|
|
#3
10-10-2005, 12:57 AM
|
||||
|
||||
|
Check
www.metraonline.com They are the brand used by many stereo installation shops. My local shop didn't stock both male & female, so they ordered both for me. $15 ea. and took 4 hrs to get from distributor. Click "Continue to Metra Online" and use application guide in right pane. Goodluck, johann
__________________
"Little Blue War Pony!!"-2002 Isuzu Rodeo Sport Sparkly-Blue 3.2v6 2wd softtop....0-60 8.0secs =)
|
|
#4
10-11-2005, 10:08 AM
|
|||
|
|||
|
Re: Radio harness plug needed
Great. Yeah, the Metra p/n 71-7712 is what I needed. Thanks a lot, fellas.
__________________
"I'll feed their greed with my need for speed"
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
