|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-08-2005, 01:39 PM
|
||||
|
||||
|
tempo vent control
How do you remove the a/c, vent control on a 91 tempo. I got the panel to come out but there is something holding it in. I dont want to yank it out and break something. The reason im taking it out is all of the lights for it are burned out or not connected. Any help would be nice.
Edit: we also need a tempo forum here
__________________
ASE Master Certified before the age of 20 Current Cars: 2001 Chevy Silverado 1500 Z71 5.3L 1996 Acura Integra LS B18 1.8L Past Cars: 1990 Buick Estate Wagon 5.0L 1987 Chevy S10 2.5L Tec Four 1995 Pontiac Grand Am 2.3 Quad 4 1996 Jeep Grand Cherokee Limited 5.2L AWD 1991 Ford Tempo L 2.3L 1992 Buick LeSabre 3.8L 1997 Buick Century 3.1L 1996 Lumina APV GT 3.4L 2006 Ford Escape 3.0L XLT 
|
|
#2
12-07-2005, 09:56 PM
|
|||
|
|||
|
Re: tempo vent control
Move the temperature control lever to cool and disconnect the temperature control cable housing from the mounting bracket on the heater case. Insert the ends of two small phillips screwdrivers into the holes of the control assembly bezel. Push on the screwdrivers, and release the control assembly from the register housing. Pull the control assembly out of the register housing and disconnect the temperature control cable from the mounting bracket and the lever arm. Unplug the electrical connectors and vacuum hoses and it should all come out. Good luck.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
