best engine mods?

97teggsr5 · #1 10-03-2005, 07:16 PM

Hey guys, not sure what I want to do next for engine mods. I have dc sports 4-2-1 headers, comptech exhaust, random tech. high flow cat, aem cold air intake, ngk iridium plugs... What should I do next? I probably want the apexi vtec controller, pulleys maybe. What are the best mods for most horsepower? Thanks.

Ace$nyper · #2 10-03-2005, 07:18 PM

on what motor?
what kinda $$ are we talking?
down time ok?
you any good with tools?
bLARRGG
and no matter what VAFC fucking eats hobo ass.

97teggsr5 · #3 10-03-2005, 07:53 PM

its a gsr engine... not sure how much money, just wanna do stuff in steps. My friends and I do most of the stuff to our cars, we work on them at our boss's house (he's got everything known to man, 2 story 4 car garage.) why do those apexi controllers suck???? what should i get instead? thanks man

Ace$nyper · #4 10-03-2005, 07:56 PM

get your self some mild cams and then get rid of your intake mani!

snag some CTR cams next great for mild na and can do great with f/i/

exman98 · #5 10-03-2005, 08:24 PM

Quote:

Originally Posted by Ace$nyper

snag some CTR cams next great for mild na and can do great with f/i/

you love those CTR cams don't you.
what do you know that i don't.

Ace$nyper · #6 10-03-2005, 08:29 PM

Quote:

Originally Posted by exman98

you love those CTR cams don't you.
what do you know that i don't.

its good gains bolts right in cheap
about as mean as you can get F/I
honda oem so you know its well made.

I've been loving mine for 2 motors.

civicHBsi91 · #7 10-04-2005, 12:47 AM

get rid of that manifold!

then the ctr's...ill be looking to get a pair soon enough.

97teggsr5 · #8 10-04-2005, 12:53 PM

get rid of my stock intake manifold?? I was j ust talking to a friend of mine with a civic si, he just bought that password carbon fiber intake thing they just came out with. he said the gains were unreal for just an intake. he had the aem cai before, and replaced it. said vtec sounds amazing. so im gonna get that, probably get type r cams and skunk2 cam gears too. are the type r cams stronger than the skunk2 stage 1 cams? and are the skunk2 cam gears better than the aem ones?

Ace$nyper · #9 10-04-2005, 02:20 PM

Quote:

Originally Posted by civicHBsi91

get rid of that manifold!

then the ctr's...ill be looking to get a pair soon enough.

on a stock gsr

you'll gain like 5 hp top and lose 10 mid trust me it sucked my stocker went back on till i got my CTRs.

CTRs then mani other way around really fucks your powerband up.

Their was a debate over skunk2 vs CTR i'm sure a search will find it but Remember this Honda has never called whole groups ricers bench racers and nobodies *refering to Honda tech* there are a few other reasons I stray from skunk2 but thats all been covered.

95whitehb · #10 10-04-2005, 03:24 PM

Quote:

Originally Posted by 97teggsr5

are the type r cams stronger than the skunk2 stage 1 cams? and are the skunk2 cam gears better than the aem ones?

the ctr cams (or '98+ spec ITR cams) are hotter than the skunk2 stage 1 cams and probably more reliable b/c they're Honda (don't quote me on the reliablity thing- just a speculation). i haven't heard great things about skunk2 cams, but i have known a few people to like their adjustable cam gears. hope that helps.

SiGNAL748 · #11 10-04-2005, 03:34 PM

Twincharge. Go.

97teggsr5 · #12 10-04-2005, 05:59 PM

alright, thanks man... how much power could i see out of it, after a set up with itr cams and skunk2 cam gears?

97teggsr5 · #13 10-06-2005, 02:11 PM

so, if i get the itr cams, skunk2 or aem cam gears, what else do i have to do to get the best power out of it? also, what SHOULD i upgrade, like, piston rings? I've seen those suggestions before.

CivicSpoon · #14 10-06-2005, 03:18 PM

Screw the cam gears. They are only worth it if you're going all out and actually need them for dyno tuning (or with a lot of head work). Otherwise it's all show and could possibly mess up your timing (seen that more than a few times). You'll also need valve springs and retainers, even just OE ITR ones will work. BTW, the exhaust cams for the CTR and the ITR are the same, it's the intake cam that's different (CTR cam is more aggressive).

QUICK_EG_B16A · #15 10-06-2005, 05:16 PM

Quote:

Originally Posted by CivicSpoon

Screw the cam gears. They are only worth it if you're going all out and actually need them for dyno tuning (or with a lot of head work). Otherwise it's all show and could possibly mess up your timing (seen that more than a few times). You'll also need valve springs and retainers, even just OE ITR ones will work. BTW, the exhaust cams for the CTR and the ITR are the same, it's the intake cam that's different (CTR cam is more aggressive).

Isn't there a difference between JDM ITR cams and the us spec? Several places over the internet offer ITR and JDM ITR. With the JDM ITRs being about 50 bucks more than the CTR cams.

POST REPLY TO THIS THREAD