|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-01-2005, 09:32 PM
|
|||
|
|||
Rotors
Alright so i got the calipers off and the pads off just fine. Now i want to remove the rotors and it looks like i need to get the last part, this metal peice that the caliper screws into, off. It has two bolts. I tried everything and i cant get them loose, they wont move at all. Moveover the rotors seem to be stuck to the hub because i cant move them forward at all. I have a 98 SE and was wondering if anyone had any ideas on how to get that rotor off (front rotors).
Thanks 
|
|
#2
10-01-2005, 10:21 PM
|
||||
|
||||
|
yeah, those 2 bolts connected to the knuckle are torqued pretty tight. If you can get your hands on a breaker bar, you might be able to apply enough torque to break them loose.
As for the rusted rotor, buy some Naval Jelly and a 3 jaw puller.
__________________
 "The CEG Nazi" www.contour.org 1996 Ford Contour SE - Sold 3.0L V6 and Arizona Dyno Chip Turbo Kit 364 whp, 410 wtq @ 16 psi and only 4,700 rpms. 1999 Tropic Green SVT Contour - Bone stock and MINT
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
