Missing plug connection on 93 grand am

DaGrease · #1 09-07-2005, 12:03 PM

Hi,

I replaced the head on the my 2.3L quad grand am and i seem to have forgotten where one of the cords connected to. I started the car up and it reved way too high than normal.

any suggestions!

Ridenour · #2 09-07-2005, 02:06 PM

Welcome to the forum. Is you engine MAF'ed? If so, it sounds like you didn't plug in the MAF. If your engine doesn't have a Mass Air Flow sensor, then it could be either your Throttle Position Sensor or Intake Air Control motor are unplugged.

skibum1111 · #3 09-07-2005, 05:49 PM

How many wires and what color are they? There's a few sensors on the front that will do that, maf sensor, tps, map sensor etc...

DaGrease · #4 09-07-2005, 10:23 PM

thanks a lot, i'll try all the ones u suggested

DaGrease · #5 09-07-2005, 10:38 PM

The connector is blue and red and the wires are black and white. It is located on the driver side of the engine

POST REPLY TO THIS THREAD