|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-22-2005, 01:07 AM
|
||||
|
||||
|
Gonna Start Partin --- LSD ZC Tranny inside!!!
OK, I've had it. I have this CRX sitting, can't really drive 3 cars with only two of us, and can't seem to sell it. So I'm parting. Here's the list... I really want to get $$ on the motor before I start picking the car for little parts, but we'll see what goes down. I can take pics of whatever you want. I'll do my best to post them up here.
1990 CRX DX shell. I'll sell the whole car, which runs fine, for $2000. I prefer to sell the motor and engine together. I will ship but you pay shipping. Here goes: 1994 D16Z6 motor, all stock w/black powdercoated valve cover D16A6 distributor JDM ZC trans W/LSD!! (includes intermediate shaft and axles, although one of the axle boots is torn.) Centerforce stage II clutch DC header Konig short ram intake Full dpfi to mpfi converted harness with resistor box and pm6 ecu Progress springs with KYB GR-2 shocks Rear lower strut bar front upper strut bar Tenzo axle back exhaust (same one LadyNRedSi used to have) Si Seats (Black and gray, no red, typical bolster tearing but not bad) Si cluster Grant GT steering wheel and adapter ring Sony CD player Alpine Type S speakers good door panels all glass/hatch good hood, bumpers front fenders are jacked up all lights are good w/working bulbs D16Y5 (same as D16Y8) Intake manifold complete Extra vtec solenoid complete D16Y5 motor w/good bottom end and head whatever other parts you want I probably have. The only thing missing is the rear interior behind the cargo box. I am keeping the wheels and tires, sorry. Is there any interest here?
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc. Last edited by 4GZChatch; 08-23-2005 at 08:17 AM. 
|
|
#2
09-02-2005, 12:08 AM
|
||||
|
||||
|
Re: Gonna Start Partin
will you sell the resistor box by itself? if so how much shipped to 27610? if not, how much for the full DPFI->MPFI harness, resistor box, and ecu?
edit: where are you located? im also interested in the bumper and hood.
__________________
HondaSwap | K20A.org | EF Honda 1988 Honda CRX DX WTB: CRX mudflaps(both front and rear)...PM me if you have some for sale!!! Last edited by Kven; 09-03-2005 at 07:36 AM.
|
|
#3
09-02-2005, 05:28 PM
|
||||
|
||||
|
Re: Gonna Start Partin
DC header $?
Konig short ram intake $? Progress springs with KYB GR-2 shocks $? Let me know the prices for these items, so we can work something out ThanX!!
|
|
#6
09-05-2005, 09:56 PM
|
|||
|
|||
|
Re: Gonna Start Partin
I need the front bumper lights and front corner turn signals. If you have them what is your asking price for both sets. I'm in Dallas tx.
|
|
#7
09-13-2005, 04:18 AM
|
||||
|
||||
|
Re: Gonna Start Partin
Si cluster? shipped to 88201 email [email protected]
|
|
#9
09-18-2005, 07:34 PM
|
||||
|
||||
|
how much for the shell. and again, where do you live?
__________________
ZC stuff http://dh-racing.com http://www.thezcr.com/html/zcbook.php http://dmoore.com/crx/zc.htm http://www.jgenginedynamics.com/HOME%20PAGE http://www.theoldone.com/ 
|
|
#11
10-05-2005, 12:17 AM
|
||||
|
||||
|
How much for the center console and everything included? (IE: center console frame, heater/ac control panel, cigarette lighter....considering you have these items) And also shipping cost to 97603. I'm missing these items in my CRX and would like them. PM me or email to [email protected] - Let me know, Thanks!
__________________
B18 powered primer gray '88 CRX HF All motor LS/Vtec being built by D2G coming soon.... '95 Eagle Talon TSi AWD daily driver 
|
|
#12
10-07-2005, 02:11 AM
|
||||
|
||||
|
Sorry for slackin
Sorry for slackin, i've been busy... here are some prices, all prices are plus shipping unless specified, I'm in Louisville, KY:
Harness, resistor, ECU together for $150 Bumper and hood, $100, has Si lower lip on bumper and fog lights DC Header for $100 Konig short ram $20 Springs/shocks $200 LSD trans for $750, you get intermediate shaft, axles, Centerforce clutch together (takes an EG clutch, so I'm just making it a kit) D16Z6 $500 Front corners: $50, one of the bumper lights is broken, but if you guy the corners i'll give you the god bumper light Si Cluster: $50 shipped to you Extra VTEC solenoid is gone Shell will go for $300 plus whatever you want left in/on it (i.e. suspension, seats, etc.) Steering wheel/adapter, $50 For the whole center console w/heater/lighter/armrest, I'd say $100 and we'll have to figure out shipping once I get it out and weigh it all. If you want to discuss further, pm me or hit me up on AIM, my SN is wiredspeedjosh, or email [email protected]. Thanks!!
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#13
10-07-2005, 02:03 PM
|
||||
|
||||
|
Re: Gonna Start Partin
bump... you guys still there?
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#14
10-07-2005, 11:34 PM
|
||||
|
||||
|
Re: Gonna Start Partin
sorry, everyone, the car was bought tonight. good luck with finding your parts!
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#15
10-08-2005, 07:01 PM
|
||||
|
||||
|
Re: Gonna Start Partin
500 for a z6 is kinda steep...
__________________
Saturn Stealership Technician #331 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
AF Bay Area Crew 
