|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Classifieds This is the place to buy and sell your Honda parts. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
08-22-2005, 01:07 AM
|
||||
|
||||
|
Gonna Start Partin
OK, I've had it. I have this CRX sitting, can't really drive 3 cars with only two of us, and can't seem to sell it. So I'm parting. Here's the list... I really want to get $$ on the motor before I start picking the car for little parts, but we'll see what goes down. I can take pics of whatever you want. I'll do my best to post them up here.
1990 CRX DX shell. I'll sell the whole car, which runs fine, for $2000. I prefer to sell the motor and engine together. I will ship but you pay shipping. Here goes: 1994 D16Z6 motor, all stock w/black powdercoated valve cover D16A6 distributor JDM ZC trans W/LSD!! (includes intermediate shaft and axles, although one of the axle boots is torn.) Centerforce stage II clutch DC header Konig short ram intake Full dpfi to mpfi converted harness with resistor box and pm6 ecu Progress springs with KYB GR-2 shocks Rear lower strut bar front upper strut bar Tenzo axle back exhaust (same one LadyNRedSi used to have) Si Seats (Black and gray, no red, typical bolster tearing but not bad) Si cluster Grant GT steering wheel and adapter ring Sony CD player Alpine Type S speakers good door panels all glass/hatch good hood, bumpers front fenders are jacked up all lights are good w/working bulbs D16Y5 (same as D16Y8) Intake manifold complete Extra vtec solenoid complete D16Y5 motor w/good bottom end and head whatever other parts you want I probably have. The only thing missing is the rear interior behind the cargo box. I am keeping the wheels and tires, sorry. Is there any interest here?
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc. 
|
|
#2
08-23-2005, 05:36 AM
|
||||
|
||||
|
Re: Gonna Start Partin
uhhhhhhm LOCATION????? close to nm hopefully
|
|
#3
08-23-2005, 08:12 AM
|
||||
|
||||
|
Re: Gonna Start Partin
Sorry, Louisville, Kentucky. Forgot to add that... I will ship if you pay shipping costs.
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#5
08-25-2005, 12:04 AM
|
||||
|
||||
|
Re: Gonna Start Partin
it was pulled at 89K, and has had about 15K on top of that, so just over 100K total. New timing belt, water pump, oil pan gasket, valve cover gasket, etc... oil changed religiously... pm me and I'll give you my phone number if you're interested.
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#6
08-26-2005, 05:35 AM
|
|||
|
|||
|
Re: Gonna Start Partin
wondering if you will sell the tranny seperate? how much? as long as its in good working condition
__________________
these are my ridez: 1) 1991 honda civic ex 4d 5 speed i/h/e/p&p head (daily driver)  2) the sleeper, my 85 toyota cressida converted over to 5 speed jdm twin turbo 1GGTE inline 6 only pushin about 8 or 9 psi  thats all im sayin
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
