|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-14-2005, 08:15 PM
|
|||
|
|||
|
alternator wiring
Hi I just put a new alternator in my 76 blazer when i converted to serpintine belt setup. The new alternator has 4 pins in it and the Bat. terminal. Does anyone know what the pins ore for? I know the big pin is for the gauge, but there are three smaller pins. thanks
|
|
#2
08-15-2005, 09:47 AM
|
||||
|
||||
|
I have built a 350 with the complete elderbrock performer kit and took a complete serpentine setup off a 4.3. The alt guy told me to leave the connectot unhooked and just use the stud on the rear of the alt. Worked fine for me as I used a aftermarket gauge package and used that stud to hook my gauge up to. When I received the alt It had heavy grease packed in the connector in case it wasn't to be used.
__________________
2000 S10Blazer LT 4 Door 4x4 Billet Grille insert Winter 30X9.5QR15 BFG's All-Terrain T/A KO's
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
