-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Nissan > Nissan Cefiro | Nissan Maxima | Infiniti I30 | Infiniti I35
Register FAQ Community
Nissan Cefiro | Nissan Maxima | Infiniti I30 | Infiniti I35 Excellent platform and the good ol' VQ30DE and VQ35DE engines.
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 08-14-2005, 11:22 AM
JAA9579 JAA9579 is offline
AF Newbie
 
Join Date: Jan 2005
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
00 Maxima-CEL code 430 and 140

Hi everyone. I am new to nissan's and have a few questions regarding a 2000 maxima V-6 which I believe has the "federal" emmissions control system. After scanning the powertrain codes i came up with po 430 bank 2 cat below threshold, as well as po 140 o2 sensor no activity bank 1 sensor 2. My question is will replacement of the o2 sensor correct this condition or does it need the ecu flashed as other websites refer to regarding nissan's technical service bulletin. Also is bank 1 the firewall side or front of engine, and where is sensor 2? closest to cat I presume. The car is all stock with about 130K. Any info at all would be greatly appreciated as I have very little knowledge of anything but GM cars. Thank you in advance, Joe
Reply With Quote
  #2  
Old 08-14-2005, 12:35 PM
Nahkapohjola's Avatar
Nahkapohjola Nahkapohjola is offline
AF Enthusiast
 
Join Date: Nov 2004
Posts: 1,653
Thanks: 0
Thanked 12 Times in 12 Posts
Re: 00 Maxima-CEL code 430 and 140

Quote:
Originally Posted by JAA9579
... po 430 bank 2 cat below threshold, as well as po 140 o2 sensor ...
Try first resetting ECU: batt off 30min. If CEL light returns, replace the sensor(s), first one, then 2nd as/if necessary. Check connectors for the po 140.

Try finding info from a manual, 2002 most probably is ok; login http://www.phatg20.net/
Reply With Quote
  #3  
Old 08-14-2005, 07:00 PM
JAA9579 JAA9579 is offline
AF Newbie
Thread starter
 
Join Date: Jan 2005
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: 00 Maxima-CEL code 430 and 140

Quote:
Originally Posted by Nahkapohjola
Try first resetting ECU: batt off 30min. If CEL light returns, replace the sensor(s), first one, then 2nd as/if necessary. Check connectors for the po 140.

Try finding info from a manual, 2002 most probably is ok; login http://www.phatg20.net/
I have reset error codes with a scan tool, and they have returned. So i am assuming that is the same as interrupting the 12 volt supply to the PCM, but I will check the connector on the sensor and replace if necessary to try to correct. Thank you for your reply, Joe
Reply With Quote
  #4  
Old 08-15-2005, 01:09 AM
rather_b_boatin rather_b_boatin is offline
AF Regular
 
Join Date: May 2005
Posts: 174
Thanks: 1
Thanked 1 Time in 1 Post
Re: 00 Maxima-CEL code 430 and 140

These are 2 separate banks coming up, therefore I would believe the problems are un-related. I had the 420 come up on my 2001 SE and it was the pre-cat. About 1k if you have $tealership do it, I was lucky-mileage below 80k-under fed. emissions warranty. On my SE bank 1 is closest to firewall (odd cyl. bank), sensor 2 is one closest to muffler. These cars have 4 cats and 4 O2 sensors. Just more $hit to go wrong!!
Reply With Quote
  #5  
Old 08-15-2005, 02:10 AM
Nahkapohjola's Avatar
Nahkapohjola Nahkapohjola is offline
AF Enthusiast
 
Join Date: Nov 2004
Posts: 1,653
Thanks: 0
Thanked 12 Times in 12 Posts
Re: Re: 00 Maxima-CEL code 430 and 140

Quote:
Originally Posted by rather_b_boatin
... believe the problems are un-related. ...
Quite possibly. Still odd to have two different faults simultaneously. Maybe the ECU is throwing random numbers...

Stupid sesnor games: The big 'fun' is still to be experienced when microsoft viruses enter car software market, Fiat is testing...
Reply With Quote
  #6  
Old 08-15-2005, 03:47 AM
rather_b_boatin rather_b_boatin is offline
AF Regular
 
Join Date: May 2005
Posts: 174
Thanks: 1
Thanked 1 Time in 1 Post
Re: 00 Maxima-CEL code 430 and 140

True, one never knows w/ these rolling enigma's. When viruses come out I'll cut harnesses place an intake w/ carburator and hollow crappy cats out!!
Reply With Quote
  #7  
Old 08-16-2005, 03:01 PM
JAA9579 JAA9579 is offline
AF Newbie
Thread starter
 
Join Date: Jan 2005
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: 00 Maxima-CEL code 430 and 140

Quote:
Originally Posted by rather_b_boatin
True, one never knows w/ these rolling enigma's. When viruses come out I'll cut harnesses place an intake w/ carburator and hollow crappy cats out!!
Thanks for the info, every little bit helps, I am trying to do this for a relative not even knowing the location of the cats, sensors, etc. since I never saw the underbody of this particular car. It sounds like it won,t be such an easy fix as some other emission sensors I,ve done in the past..Joe
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Nissan > Nissan Cefiro | Nissan Maxima | Infiniti I30 | Infiniti I35


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:21 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts