|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
While snow Plowing last year my truck just died, I relized I had no spark and saw that the coil was damaged. I replaced the coil and still had no spark. I replaced the Ignition Ignitor(Big Bucks) and the truck started and then died in about a minute. I checked for spark and had none again. When I wiggle the wires at the ignition ignitor/coil, I hear a clicking at the fuse panel next to the battery. I located this clicking to be the electronic fuel injection relay. The truck just cranks, I have no spark and don't know what to do to solve this problem. Any help/ideas would be greatly appreciated.
|
|
#2
|
|||
|
|||
|
bad wires
if the coil or ignitor had physical damage and now if wiggling the wire make so sort of connection i would say that you have a bad wire going to one of the parts or a bad connection!!! also if the vechicle starts and dies right away i could be the airflow meter on the air cleaner has a bad connection or is bad!
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|