|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Europe England, Holland, Denmark, Germany, etc... |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-30-2002, 01:02 PM
|
||||
|
||||
Can anyone help. H&R document in German & need some info from it.
Hi
the link below is from the H&R sports sring site in Germany. It refers to springs for the 86-89 Accord. I have put it through a online translator and got nothing but pidgeon english out of it that was ininteligable. I want to know if the document contains any technical information on the springs and if it mentions if they fit the AERODECK I own. I know that the aerodeck is mentioned but that is the bit where the online translator really lost it. I have had 3 sets of springs for the ca4/ca5 accord 1986-1989 accord made in the UK on my car and all were a disaster. One set raised the rear of the car 10-15mm, one set were softer than standard and one set just wouldnt fit. I have a set of the H&R springs on there way to me but am very interested as to what the document says. The link to the document is http://www.hr-spezialfedern.de/images/pdfs/29673.pdf You will need acrobat installed as the file is in pdf format. thanks Paul AERODECKUK:smoker2:
__________________
Mercedes C250td elegance Quantum 2+2 
|
|
#2
04-30-2002, 01:55 PM
|
||||
|
||||
|
K here we go- I hope I got ur point, u want ot know if the springs fit an aerodeck right?!
Ok, they fit CA4; CA5, named Accord 1600; 2000; LS 2,0; Aerodeck 2,0. So I think theyll fit on ur car. If u wanted anything else just ask again, somebody of the germans will try to translate it for u 
__________________
play da game for fun not fame  what for idiots... theyre discussing about a law were u have to switch on the lights the whole day but when u switch on the fog lights without fog u have to pay for this 'criminal act'... ZOMTEC rulez!!! 
|
|
#3
04-30-2002, 02:06 PM
|
||||
|
||||
|
Hi
Thanks thats what I wanted to know. I would like to know if there is any technical information/specs but it isnt vital. If anyone is bored and they want to look I would be pleased to get any information I can. Thanks Again Paul
__________________
Mercedes C250td elegance Quantum 2+2
|
|
#4
04-30-2002, 09:35 PM
|
||||
|
||||
|
Most of it are informations for the german "TÜV" so there´s not really much important for you.
Only things which might be interesting: 1.) The position of the beams of the headlights have to be checked. 2.) After having installed the springs an alignement has to be done. 3.)You´re not allowed to put more than 700kg on the rear axle anymore. 4.) The use with nonskid chains has not been tested. There are two sentence which I can´t translate but seem to be very important. => IV.2 and IV.4 Hope it helped a bit.
|
|
#5
05-01-2002, 05:26 AM
|
||||
|
||||
|
Hi
thanks for the information it has helped with a couple of things. I should see how they fit soon as I am expecting them to arrive today or tommorow. Thanks Again Paul
__________________
Mercedes C250td elegance Quantum 2+2
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
