|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Cars/Parts for Sale/Exchange Sell your car and parts or post what you are looking for. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
||||
|
||||
|
Come buy some Camaro parts....
Okay... I am now in the recovery stage of my engine swap... so I need you to buy theses parts from me. Actually they are going to eBay and I wanted to give yall first choices. I got pictures of all individual parts. Everything is in functional condition... and I have pointed out any imperfections. All parts are from 3.1L V6 engine... some will work on all camaros.
![]() T-Tops : both, slight scratch on one, weatherstripping worn in couple of places... easily repaired. Front and Rear springs : perfect... I will paint them if you would like. Air intake ducting: just like new. Starter: 9months old... lifetime warranty. I also installed heat shield on it, to keep the solenoid working perfectly. works on V8 too. Smog pump: works fine. Power Steering pump: serpentine pulley. comes with V6 bracket. will works on V8. Rocker arms: factory, stamped steel. 1.5 ratio. used on 1987-earlier cylinder heads. comes with all hardware. set of 16. 2-groove crank pulley: painted black. Wheels: not for sale unless the price is right. Only 80miles on tires, brand new $350 H-rated performance tires. damn good traction... the 6cyl couldn't even spin them to do a burnout. I'm using them as winter wheels unless someone wants them. all center caps included. one rim has slight curb rub dent.
__________________
90 Camaro RS V6 - swapped to V8 -350 block, GM Vortec L31 Heads, Edelbrock Performer RPM Vortec intake, 750cfm carb, CompCams XE268 Camshaft ESTIMATED 360-420 hp 380-430lb/ft torque
|
|
#2
|
|||
|
|||
|
what year is this stuff?.............
mods we need a classifieds sub-forum
__________________
1984 Camaro 5.7L 350 700R4 Holley 650 Cfm Edelbrock Performer Intake-Manifold Crane Cams Duration @ .050": 204/214 Lift:420/442 Summit HEI Distributor Hedman Shorty Headers Hedman Y-pipe Dynomax Turbo cat-back NOS Decal VTEC Decal |
|
#3
|
||||
|
||||
|
Re: Come buy some Camaro parts....
there is a classified section on the forum as a whole, you can post it there and then post a link.
__________________
Chevrolet Camaro - I enjoy beating the hell out of people http://www.automotiveforums.com/vbulletin/showthread.php?t=68052 |
|
#4
|
||||
|
||||
|
Re: Come buy some Camaro parts....
how much for the tires?
battle battle
__________________
Quote:
Quote:
![]() ![]() ![]() www.Xenostalgia.com Exit your Reality || 97 Acura Integra GS 2DR |
|
#5
|
||||
|
||||
|
Re: Come buy some Camaro parts....
All parts (except rocker arms, and 2-groove pulley) come from a 1990 V6 camaro. however the year is irrelevant. if you have a 3.1L engine, the engine parts will work, if you have a 1982-1992 camaro, all the other parts will work.
Name your own price for the parts... of course, only reasonable offers will be considered. location = middle of missouri
__________________
90 Camaro RS V6 - swapped to V8 -350 block, GM Vortec L31 Heads, Edelbrock Performer RPM Vortec intake, 750cfm carb, CompCams XE268 Camshaft ESTIMATED 360-420 hp 380-430lb/ft torque
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|