|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Off-Topic Talk about anything other than cars. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
hay all
on monday I am going to go look at a 1st gen talon.
I is not a turbo anything so there are some things that have my consern cause if I were to get the car I think I would want to turbo it, now if I did put a turbo kit on it then would I have to change pistons or anything what I am trying to say is would there be anything that I would have to do other then jsut put on the kit and go? thanks Ben ![]() http://cgi.ebay.com/ebaymotors/ws/eB...tem=7989026367 Last edited by lostmypicks; 07-25-2005 at 04:51 PM. |
|
#2
|
||||
|
||||
|
Re: hay all
get a turbo car to begin with. nobody has EVER made a turbo n/a cheaper than buying a turbo car to date.
|
|
#3
|
|||
|
|||
|
Re: hay all
hay trust me I have been looking all over it is not like they are all over the place.
I would buy on the internet but the always seem to be in like new york or somewhere like that so getting a dsm turbo is almost out of the qestion so do you think it is a good set or not? |
|
#4
|
||||
|
||||
|
If you want a turbo dsm bad enough, you will go to any length to find one. I searched for months for a gsx down here in Florida, and had no luck. So, I ended up finding one in Illinois, and had it shipped down here on a monday, and had it that thursday night, for $600! Check in your yellow book for local car shippers, so you could search outside your general area.
__________________
![]() 2006 Wicked White Evo IX GSR 323 awhp / 311 tq. (Dynojet) http://www.projectevoix.com http://www.4WStuning.com 99 RS < 98 GSX < 06 EVO
|
|
#5
|
|||
|
|||
|
Re: hay all
ya I have seen alot that I could ship but alot of the time
it's tons of money. And you dont get to realy try it out before you buy it you now what i sayin but mabe I should look more into that |
|
#6
|
||||
|
||||
|
Ya, I guess I got lucky and got it from a private dealer I found on autotrader.com. He specialized in rare and exotic cars. http://www.exotic-motors.com/ is his website. He hasn't had any gsx's since mine, but maybe you could talk to him for him to maybe find one for you.
__________________
![]() 2006 Wicked White Evo IX GSR 323 awhp / 311 tq. (Dynojet) http://www.projectevoix.com http://www.4WStuning.com 99 RS < 98 GSX < 06 EVO
|
|
#7
|
||||
|
||||
|
I am in the same deal as you are with my friend. I have been helping him look for a 1g turbo. If you want one bad enough, you will look thoroughly for or wait for one. Check these sites:
www.ebay.com www.dsmtraders.com www.dsmtuners.com www.autotrader.com www.cars.com www.carsoup.com (might work or not depending on your location) Combined theres probably a good couple thousand ads for you to look through. Yeah it gets boring, but I have picked through every page of dsms on each of those websites everyday for a couple weeks, and its finally paying off. We found a car today that is perfect for us (1991 TSI AWD, 5 spd, 100k, needs minor work). The funny thing is we saw the ad like an hour after it was listed and emailed him right away. In return for countless hours of looking through internet classifieds, we are getting a great deal on an awesome car. I agree with JoeWagon on the turboing a N/T car... just buy one with a turbo already, its much easier and cost effective. Good luck, I hope you find what you are looking for. |
|
#8
|
|||
|
|||
|
Re: hay all
thanks for all of the sites the only one that I have not tryed is the dsmtraders so I will get on that and try.
the thing is guys is that turboing a N/T car for me might be cheeper because I can get a realy nice 2g for like $2500 and then if this turbo kit is any good or the others on ebay then i could add a turbo for like 500 to 600 dollars. so I dont know I will go look at the car today and if it is no good then I will go look at another one that this guy at a dillership found for me thanks alot guys |
|
#9
|
||||
|
||||
|
Re: Re: hay all
Quote:
It might be beneficial for you to read this thread..... http://www.automotiveforums.com/vbul...d.php?t=200222
__________________
'92 3000gt SL Zoom Stage 1 Clutch Quote:
|
|
#10
|
|||
|
|||
|
Re: hay all
ok then,
well I have ton of friends who have done it before and also one of them have a welder that we could use. but what I realy need to now is, would the set that I want to buy off ebay good. there is a link at the top so if the set is good then if would jsut cost me like $5-600. so I need someone to look at it and tell me if it is good or not. thanks http://cgi.ebay.com/ebaymotors/ws/eB...tem=7989026367 |
|
#11
|
||||
|
||||
|
Re: Re: hay all
Quote:
Those are only the general parts that a turbo car would require. i.e. turbo, intercooler. None of the custom fabrication shit is included with that package. That is what you need. Look at this and compare to your shitty ebay package. http://www.hahnracecraft.com/auto/eclipse/eclipse.htm
__________________
'92 3000gt SL Zoom Stage 1 Clutch Quote:
|
|
#12
|
||||
|
||||
|
Re: hay all
What part of Utah are you in. I'm in Boise Idaho. I know where there is a 1g AWD Turbo Laser and a 1g AWD Turbo Talon for sell here in town. I believe I saw 1g Turbo eclipse here as well.
__________________
2006 Mitsubishi Eclipse GT Debagged, 18" MKW Rims, 5% Tint, Ralliart Eyelids, Outlaw Racing IM and TB Spacers, Ingals "Stiffy", Energy Suspension Polyurethane Motor Mounts, Tanabe Lower Tie/Strut Bars, Progress Rear/Eibach Front Sway Bar, D2 Racing Lowering Springs, RRE Headers and Axelback, AEM CAI w/ Bypass, 12000k HID Heads, 3000k HID Fogs, Sunroof Wind Visor, Drilled/Slotted Front/Rear Rotors, and Ceramic Brake Pads. |
|
#13
|
||||
|
||||
|
That kit looks kinda shitty, i would go with a turbo car to start, just a few things that kit doesn't include: oil lines, intercooler piping, intake, or exhaust, you'd also problably need some type of fuel management, i know greddy's kit omes with an e-manage. Just get a turbo car.
__________________
95 GSX:FMIC, 6-bolt, evo 3 16g, 2600 act clutch, 1g bov (crushed), and a 3" turbo back exhaust, dsmlink, dks 272 cams, wideband 02, Coming soon 2.3L Stroker, 1mm oversized valves, crower sprigs. 91 TSI AWD auto, gm 3.5 maf, maft, fmic, emanage, profec e-01, 3" turbo bk exhaust +more little stuff. http://www.ratemydsm.com/member/ez1286/?member=ez1286
|
|
#14
|
|||
|
|||
|
Re: hay all
I see what you guys mean. I mean that is not the only kit that I could get. this one looks a little more complete. but I do see what you guys are talking about
oh ya I am in roy ut http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW |
|
#15
|
||||
|
||||
|
Re: hay all
Ahhh....good old SSAutoCrap.
I wouldn't buy a lightbulb from those fuckers. Stay away from them, they sell nothing but junk. Their turbos split right down the center of the housing and their tubular manafolds fall apart in a matter of weeks. But, then again, it's your money. I just wanted to let you know what I had heard.....I think it's all over on tooners.
__________________
![]() 1997 Spyder GS-T 5-Speed EVO III 16g, DSMLink, Walboro 190 lph Fuel Pump, FIC 650cc injectors, CoolingMist 150psi Methanol Injection, Greddy EVO 2 Cat Back, 2.5" Extreme DP, 2.5" Extreme Hi-Flow Cat, Injen intake, HyperDrive C1 Street Disk & PP, HyperDrive Lightweight Flywheel, 1g BOV, RRE UICP, Home Depot MBC, AEM UEGO WBO2, Brembo Slotted rotors, Akebono Ceramic Pads |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|