Stock Foglights

[hpman247]

I', about to get my car back from getting that new replacement engine, 99 GA SE, and I have a question about the foglights.

On the left side of the car the connector is there to easily hook up a new foglight, but the one on the outside only has bare wire. Do any of you know how I can connect the stock foglights to that since they only have the connector input.

Just for reference, the foglights were not on the car when I bought it. They had been literally rpped off but the brackets are still up there and the screws as well.

[catback23]

I can't for the life of me quite understand your whole post...I'm gathering your car came from the factory with fog lights but someone stole em and the bulb connectors and you wanna know how to connect fog lights to the wire because there isn't a connector to plug in to (because the thief stole it).

Simply answered if you get aftermarket fog lights you can just wire them to the bare wire either by using a butt splice crimp connection or by soldering it and then taping up or heat shrinking the connection to keep water and dirt out, if you want to go with factory lights just go to a junk yard and get what you need and just like aftermarket hook up crimp or solder the wires and of course tape them or heat shrink them.