Aftermarket boost gauge??

[zx11_12]

My stock boost gauge isn't working. I know everyone says that the stocker is a POS, but I really don't want to hang a gauge in a non stock location. Besides, that would still leave a non-functioning gauge in the dash. I don't want to install a different looking one in the stock location either, since it is right beside the other two stock gauges...soooo...my question is this: Does anyone make an aftermarket boost gauge that looks like the original and mounts in the stock location?

Thanks,

Steve

[Hotshot8792]

Originally Posted by zx11_12

My stock boost gauge isn't working. I know everyone says that the stocker is a POS, but I really don't want to hang a gauge in a non stock location. Besides, that would still leave a non-functioning gauge in the dash. I don't want to install a different looking one in the stock location either, since it is right beside the other two stock gauges...soooo...my question is this: Does anyone make an aftermarket boost gauge that looks like the original and mounts in the stock location?

Thanks,

Steve

The three gauges in the center are all one piece. Basically your options would be in this case to either replace all 3 with an individual boost gauge, temp gauge, and oil pressure gauge (which can look extremely good if done right) or you can put an aftermarket boost gauge in an a-pillar pod, or you can buy a mounting cup and pretty much locate it anywhere you want. Sucks that mitsu couldnt have put an accurate gauge in our cars to begin with.

[duchguy]

ignore it and go with an aftermarket one