-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Chevrolet > Blazer
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 06-19-2005, 01:39 AM
sti4race sti4race is offline
AF Newbie
 
Join Date: Mar 2005
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to sti4race
Question 1991 blazer 4x4 4dr."locks,oil presure,volts,ABS problems.

I have just got my self a 91 blazer 4dr. 4x4 and so far I'm having trouble with the windows "front don't go down/back go down very slowly, the locks will only lock from the driver door and it somtimes has a gletch when I shut the door, The ABS light stays on all the time, The right rear brake skreches, My oil presure stays at 80 when driving and the temp gage flashes when I take the HWY across town... so any input would be most helpful.....
Reply With Quote
  #2  
Old 06-20-2005, 01:33 AM
Kurai Kurai is offline
AF Newbie
 
Join Date: May 2005
Posts: 88
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 1991 blazer 4x4 4dr."locks,oil presure,volts,ABS problems.

The ABS light comes on when an error code has been recorded and stored. If your right rear brake is squeaking, it's probably giving an error that the ABS computer is picking up. Have that brake checked out to make sure nothing is afoul with it--poor braking ability is not cool.
Reply With Quote
  #3  
Old 06-21-2005, 01:21 AM
sti4race sti4race is offline
AF Newbie
Thread starter
 
Join Date: Mar 2005
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to sti4race
Re: Re: 1991 blazer 4x4 4dr.

anyone know what the standerd driving oil psi is ??????????
Reply With Quote
  #4  
Old 06-21-2005, 06:35 AM
rlith's Avatar
rlith rlith is offline
AF Enthusiast
 
Join Date: Jun 2003
Posts: 3,549
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via AIM to rlith Send a message via MSN to rlith
Re: Re: Re: 1991 blazer 4x4 4dr.

Quote:
Originally Posted by sti4race
anyone know what the standerd driving oil psi is ??????????
Should run up to 60-80 cold when started, then drop down to 25 posi while hot at idle, then 40-60 at load while hot.
__________________


95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
Reply With Quote
  #5  
Old 06-21-2005, 10:50 AM
s10blazerman4x4's Avatar
s10blazerman4x4 s10blazerman4x4 is offline
AF Enthusiast
 
Join Date: Jun 2004
Posts: 1,886
Thanks: 9
Thanked 1 Time in 1 Post
Send a message via AIM to s10blazerman4x4
Re: 1991 blazer 4x4 4dr."locks,oil presure,volts,ABS problems.

For the Windows you need to check the fuses and what not but in my 1991 all it needed was a new motor in the passenger window and im back at 2/55+
__________________
1991 Chevy S-10 Blazer 5.7 V8 RIP
1999 Chevy Blazer 2dr 4.3
Reply With Quote
  #6  
Old 06-21-2005, 03:35 PM
sti4race sti4race is offline
AF Newbie
Thread starter
 
Join Date: Mar 2005
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to sti4race
Re: Re: 1991 blazer 4x4 4dr.

Quote:
Originally Posted by s10blazerman4x4
For the Windows you need to check the fuses and what not but in my 1991 all it needed was a new motor in the passenger window and im back at 2/55+

fuses are fine and the motors look ok but I was thinking it could be a short in the switch harnes becuase its only the front windows that don't work...
Reply With Quote
  #7  
Old 06-21-2005, 07:25 PM
s10blazerman4x4's Avatar
s10blazerman4x4 s10blazerman4x4 is offline
AF Enthusiast
 
Join Date: Jun 2004
Posts: 1,886
Thanks: 9
Thanked 1 Time in 1 Post
Send a message via AIM to s10blazerman4x4
Re: 1991 blazer 4x4 4dr."locks,oil presure,volts,ABS problems.

how can a motor look fine did you test them? each door has its own motor
__________________
1991 Chevy S-10 Blazer 5.7 V8 RIP
1999 Chevy Blazer 2dr 4.3
Reply With Quote
  #8  
Old 06-21-2005, 11:55 PM
sti4race sti4race is offline
AF Newbie
Thread starter
 
Join Date: Mar 2005
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to sti4race
Re: Re: Re: 1991 blazer 4x4 4dr.

I know each door has a motor.... they look ok because there is no burn marks or gruves in the armetures or around the wires. I think the motors in the back doors may need to be cleaned and oiled or maybee replaced but since I need a new test light I can't tell if the front motors are getting any power, But today when I closed the door the locks shuke and studerd like somone was repedly pushing the buttons.
Reply With Quote
  #9  
Old 06-22-2005, 06:00 AM
rlith's Avatar
rlith rlith is offline
AF Enthusiast
 
Join Date: Jun 2003
Posts: 3,549
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via AIM to rlith Send a message via MSN to rlith
Re: 1991 blazer 4x4 4dr."locks,oil presure,volts,ABS problems.

Step by step on testing and replacing your window motors. http://www.usedpartscentral.com/tech/page1.htm
__________________


95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
Reply With Quote
  #10  
Old 06-23-2005, 02:59 PM
sti4race sti4race is offline
AF Newbie
Thread starter
 
Join Date: Mar 2005
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to sti4race
Re: Re: 1991 blazer 4x4 4dr.

thanks for the info but I already got it.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Chevrolet > Blazer


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:19 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts