|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
po302 OBDII code
After pulling P0302 code off my windstar, I replaced the wires and plugs thinking this would do the trick to get the engine light off. Also pulled a P0401-Egr code. Now 401 is not coming up, just the 302. Any ideas on what could be the problem? I am still replacing the egr valve this weekend, I've already replaced the egr sensor. What's the next logical step?
|
|
#2
|
|||
|
|||
|
Sounds like you'd benifit from the lower intake cleaning (which cleans the EGR ports). Try a search on this topic. Do not swap any EGR parts until you do the cleaning.
|
|
#3
|
|||
|
|||
|
302 is a misfire of #2 Cylinder - I just went through this & found a bad coil pack (Fairly common problem) - Try checking the spark on the #2 wire with a timing light & see if the flash is constant - Also could be a stuck fuel injector or an internal cylinder/valve problem - Good Luck
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|