|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-12-2005, 08:18 PM
|
|||
|
|||
Back Firing stalling ?
I've got a 97 3.3 starts good after about 10 minutes back firing and missing and stall No codes ? new cam sensor plugs and wires 1 year old. any ideas very much appreciated before I break down and spend more $$$
|
|
#2
06-12-2005, 10:05 PM
|
||||
|
||||
|
-
Might be an issue with the timing, but try the test outlined here: http://www.automotiveforums.com/vbul...d.php?t=398005  -
|
|
#3
06-14-2005, 11:39 PM
|
|||
|
|||
 Caravandrvr Thanks so much would have never figured that one out. one thing , how come no codes when system drops bellow 12v. it did stall out only took ten minutes though. thanks again Tom 
|
|
#4
06-15-2005, 11:08 PM
|
||||
|
||||
|
Re: Back Firing stalling ?
-
Can't say for sure why it won't throw a code - I can only assume that when the voltage drops it chokes the computer. I have seen them throw a code 41, but a lot of times it doesn't, and even when it does it gets misdiagnosed! Thanx for the follow up and letting us know it helps. Since I started working on these things I've come to the conclusion that they get a bad rap due to a lot of misdiagnosis causing parts to be needlessly changed. This is one of those types of things - right up there with "you need a new transmission".....  -
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
