|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-02-2005, 01:44 AM
|
||||
|
||||
|
COmpression?
Does anyone know what a normal range of pounds of compression for a GSR is??
thanks in advance
__________________
95 Integra GSR, I/h/e, 15" TSW wheels, short shift, front & rear swaybar, lowered 2", 93 GSR head & intake manifold 
|
|
#2
06-02-2005, 11:23 AM
|
||||
|
||||
|
Re: COmpression?
GSR's comp. ratio is supposed to be 10:1
__________________
|
|
#3
06-02-2005, 09:52 PM
|
||||
|
||||
|
Re: COmpression?
how many psi does that equate to
__________________
95 Integra GSR, I/h/e, 15" TSW wheels, short shift, front & rear swaybar, lowered 2", 93 GSR head & intake manifold
|
|
#4
06-03-2005, 05:45 AM
|
|||
|
|||
|
Re: COmpression?
if you are not below 175. you are good. also, as long as the results are across the board, you are good.
__________________
99 [email protected] psi si- I voted for the Terminator for Gov. 95 HB- B16a2- SC34@12psi WTB: USDM B16a2 or B16a3 complete short block. pm is the key. FS: B series InlinePro cast mani, PnH RC 550s, and Hondata S2b. pm me.
|
|
#5
06-03-2005, 10:32 AM
|
|||
|
|||
|
Re: COmpression?
My gsr has 215 psi all even on 4 cylinders, thats with cold engine. if i add a tablespoon of oil (called a wet test) in each spark plug hole, i get exactly 240 psi, which is normal since part of the oil's job is to seal the clearance between the ring and cuylinder wall. The larger the diffrence between the wet and dry test the more your rings are used up. If any of your cyl are less than 90psi and your car is under guarantee, honda has to re-build your engine underguarantee and they will change all your ringa on all cylinders. I got mine changed at 99000 kms under guarantee.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
