Modelling Space

[Twist]

Hey guys and gals,
Post pictures or descriptions of your modelling space. Here is a picture of mine with annotations/descriptions (but only because I got bored).

I have 5 Tamiya spray can, 1 Tamiya Primer, Two Tweezers, 1 Roll of Duct tape, about 36 hand paint jars from Model Masters, Tamiya and Gunze Sangyo. 1 Tamiya Saw and 1 generic hobby knife. 1 thing-o-Elmer's glue.

[daggerlee]

I split my work area into two areas, painting and assembly. Here's my painting area



28 Tamiya paints, 4 Model Masters, 1 Gunze Sangyo. 3 cans of automotive primer in the background.

12 airbrush mounting sticks made from alligator clips and q-tip sticks, Parafilm M for masking, die-cast Audi TT that I made one day when I got bored.

Here's the assembly room


All my sandpaper, polish, glue and side cutters, reside here, nothing to mention really

[pkw1]

oh man, must be nice to have a modeling desk :o

I just work on my models on my computer desk... then paint in the bathroom... stink up the house with paint, then get in crap with my mom :o

[primera man]

Bit of a old pic....but this is what things look like most of the time. My 30 odd spray cans i keep stored in the cupboard.

[nikanora]

Here are acouple pics of my modeling table... some are of it in use and some are not


That needle(suringe[sp]) at the bottom is amazing, i suggest all of you guys, if you don't have one similar, to get one, i mainly use it for getting alchole out of the bottel to thin my paint for airbrushing and conventely, it right in the top of the bottel but wont fall through. you can use exactly the amount you want to, you can also use it to mix exact amounts of paints together (20% of black to 80%red for ex.)


*Notice the clerks poster i got for a buck

(Older Pics)



I'm not going to list what i have there but my compressor is located right underneith the table for convience.

[daggerlee]

Haha your modeling table looks exactly like my assembly table before I raided the table downstairs

What kinda Paasche is that? VL? And is that an airbrush holder or a parts holder in the first pic>

[nikanora]

Yeah, it's a dual action VL, it's my first airbrush and i must say i like it



That funny thing there is a great piece holder when i need to paint something and A) don't want to touch it, or B) let it dry while i paint something else.
I think they sell them at hardware stores and radioshack.

nika

[S Brake]

Here is a picture of the assembly and hand paint area:


Here is a picture of my current body painting area (just on the floor of an empty room):


Here is where the operation will be moved to in about a week or when i finish painting the GNX:

[Ssom]

Well my modelling area is in my parents garage, I have 1/2 a can of primer, black, aluminuim, felsh and red paints, some cement, some brushes, making tape and a Scalpel

[S Brake]

i moved my painting area outside to the garage like i said. the spray cans are off to the right. future mods might be higher walls and even a roof to go on it.