|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#2
05-26-2005, 11:17 PM
|
|||
|
|||
|
Re: changing fuel filter?
Twist. Don't use pliers unless you have hose to spare or don't mind losing a couple inches off both sides. It sucks, I know. If anything, ditch those old fuel lines and run new ones. 5/16" ID.
__________________
-Cory 1992 Nissan 240sx KA24DE-Turbo: The Showcar Stock internals. Daily driven. 12.6@122mph 496whp/436wtq at 25psi 
|
|
#3
05-28-2005, 01:26 PM
|
||||
|
||||
|
Re: changing fuel filter?
yea... don't use the pliers on them directly.. it'll rip the rubber right off. LIke fanatic said, twisting would be ideal...
make sure you dump the fuel lines and release the pressure before you remove it... also keep a towel under the filter... the remaining fuel in the line will spill out when you remove it...
__________________
1993 RMS13 5MT KA
|
|
#4
05-28-2005, 04:53 PM
|
|||
|
|||
|
spray wd-40 on the joints
also take a little 90degree pick or such device that can lift up the hose a little bit where it slides off and spray wd-40 inside there to help lossen it up even more, let it sit for 30 seconds or so and take it off now.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
