-
Go Back   Automotive Forums Car Chat > Chevrolet > Beretta
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 05-11-2005, 09:17 PM
greatwoofy greatwoofy is offline
AF Newbie
 
Join Date: May 2005
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
'96 3.1L stalling problem.

I have a '96 3.1L Beretta --

the car starts fine.

idles for a few minutes if nothing is done. but it stalls at seemingly random intervals. of course if driving i put the car in neutral and start it again --
although each time it seems to be stalling more quickly.

when this happens it's as if all power is lost, all the lights are on as if the key was just keyed forward before starting. And no code is thrown.

It happens sometimes when the car is idling//cruising or accelerating or even decelerating. A little of everything.

Sometimes when the car wants to stall the spedo indicator will fall drastically only to rise back up once the engine finds it is still running. Some diagnostic lights will light up when this occurs but quickly turn off when the engine gets back its groove.

-- Michael
Reply With Quote
  #2  
Old 05-12-2005, 04:37 PM
greatwoofy greatwoofy is offline
AF Newbie
Thread starter
 
Join Date: May 2005
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Fixed it I think...

-- I had replaced the engine and it seems the nut that holds the negative terminal cable onto the motor ground had come loose. I simply removed the nut and terminal wire, cleaned, then rehooked it back up tightening it as best I could.

Car ran around the block fine. Very much relieved!

-- Michael
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Chevrolet > Beretta


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:45 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts