headders for a 70 camaro with m22 trans

[camarorick]

Swapped the tired powerglide out for a brand new m-22 manual transmission. Now the shortty headman headers will not clear the zbar. Anyone got a good partnumber for headders for a 70 camaro with manual transmission?

Camaro Rick

[Genopsyde]

You're probably gonna need long-tube's. check on http://store.summitracing.com/ there's all kinds of options.

[justlearning]

or they make headers for engine swaps and such to allow for clearance of these type of problems u should get a mag. from paw i got one for like five bucks, they take forever to get here but its worth it its 827 pages w/ good prices too

[Earlsfat]

I've got a little problem that's gonna require me to pull the heart out of mine. I'll see if I've got any numbers on mine that are readable and post them.

[camarorick]

All I need is a part number.... seems like everything that can go wrong is going wrong.

The starter did not fit after the 11 inch flywheel was installed, but I got the correct starter and now am in search of the two bolts to mate it ot the block.

Rick

Originally Posted by Earlsfat

I've got a little problem that's gonna require me to pull the heart out of mine. I'll see if I've got any numbers on mine that are readable and post them.

[Earlsfat]

hehehehehahahahahahohohohohhoho......ooooooohhhhno ooo!

I feel your pain brother. Just look at some of my posts, you'd think I was a hypochondriac or something. Sadly, it's just my maro looking good and running bad, and slowly but surely making me broke and insane.

I'm looking at replacing mine with Dynomaxx ceramacoat headers while I have the engine out, but not sure if they'll mate up to a 3" exhaust. I've got a 454 in mine so they probably won't fit yours, BUT jeg's lists the engine and the vehicles, you might order one of their catalogs (or hit their website http://www.jegs.com/cgi-bin/ncommerc...61&cgrfnbr=840 ) and see if you can get what you need there, shit... call them for that matter.