Quote:
|
Originally Posted by brandon_rip84
I have a Gentex mirror (GNTX-261) with autodim, compass, temp and passenger airbag display. I've started tearing down the headliner in the front because it seems to be glued down way to well. The headliner is getting messed up and I want to know if there is going to be a plug under it and if it will work for this mirror. How far is the plug under there? I didn't feel it in about the first 3 inches. I dont want to do screw up my headliner for nothing.
|
I assume that you do not have the overhead console. I can only answer for the way my '02 was set up WITH an overhead console. After pulling the console down in front, I was able to see a small harness through the hole in the headliner where the map light wires come through. I tugged on it and out popped a small plug. It happened to be the correct harness, and although my autodim mirror with compass is out of an Oldsmobile, it still plugged in and works fine. I'd say that this harness was about 4" back from front center and the plug seemed to be secured by an unseen clip holding it to the inner bracing to not rattle around. I hope you have the same harness in the same place if you don't have the console, but I can't say.
05-04-2005, 06:05 PM
