|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-07-2005, 11:38 PM
|
|||
|
|||
help with serp. belt installation on a 2k rodeo
i have a 2000 rodeo with the 3.2 w/76k miles and my serpentine belt is cracked so i picked up a new belt. i found the belt tensioner and i removed the nut and that little plate, but nothing happens. the tensioner does not move at all. am i doing something wrong. i spent 45 minutes trying to figure this out when it should probably be a 10 minute job. thanks in advance
|
|
#2
04-07-2005, 11:49 PM
|
|||
|
|||
|
Re: help with serp. belt installation on a 2k rodeo
 no parts to remove. I put my socket wrench on it and then a 2' peice of pipe on the end. Tug clockwise to releave the tension. http://isuzufaq.ibctech.ca/#faq21
__________________
-Ryan Isuzu Moderator Car Show Tips Operations manager with a results-driven passion for process improvement FAQ 98-04 Isuzu Rodeo, Rodeo Sport, Amigo, Trooper SOLD - NOV2015 - 2000 Amigo, V6, HT winter, ST summer, 2wd
|
|
#3
04-08-2005, 11:38 AM
|
||||
|
||||
|
Re: help with serp. belt installation on a 2k rodeo
Nice pic Ryan, you keep this you will end writing your own Haynes/Chilton type manula for these things.
__________________
98 Rodeo S/LS 3.2L V6 Auto 4WD 150k
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
